The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Ramhorns bind on centerbolt covers (https://67-72chevytrucks.com/vboard/showthread.php?t=244311)

TonyJohnson

06-06-2007 11:28 PM

Ramhorns bind on centerbolt covers

My ramhorn exhaust manifolds are binding on my valve covers. I've got the late model vortec roller motor. I suppose I could do headers, but what I'd really like are some later model manifolds with a lower profile. My current setup has the dump straight down. Anyone with suggestions? Will the gen III manifolds bolt to a '96 vortec head? I'll grab some pics tomorrow... Thanks in advance, Tony.

woodridge

06-07-2007 07:44 AM

Re: Ramhorns bind on centerbolt covers

I ran into the same problem, just took the grinder and notched the manifold enough to clear.

TonyJohnson

06-07-2007 09:07 AM

Re: Ramhorns bind on centerbolt covers

Quote:

Originally Posted by woodridge (Post 2210947)

I ran into the same problem, just took the grinder and notched the manifold enough to clear.

Dooh.... why didn't I think of that? Thanks! :)

All times are GMT -4. The time now is 09:09 PM.