Parting out 70 LWB
 

Ive got a bunch of stuff to sell, most from a 70 LWB I'm parting out. Some that have been posted before but I'll include them here so I can keep up with it all. Large items would need to be picked up, smaller stuff can be shipped for actual cost of UPS or ? Thanks for looking and post up if you are interested in something. Thanks, big

69-70 Grill, good driver condition, some small dings, scrapes, etc. Includes inner, outer, and headlight rings. $150
http://img106.imageshack.us/img106/5...ture040fh9.jpg

Uncut radio hole A/C dash repair section. Tell me where you want it cut. $40
http://img249.imageshack.us/img249/1...ture042zz9.jpg

Core Support, not rusted out under the battery area that I can see. Looks pretty good and straight to me. $75
http://img501.imageshack.us/img501/9...ture043jz3.jpg
http://img501.imageshack.us/img501/3...ture044yy6.jpg

Left front fender, pretty straight and rust free that I can see. $100 with inner fender.
http://img461.imageshack.us/img461/3...ture045mo8.jpg

Big old bumper $30
http://img50.imageshack.us/img50/2717/picture046hu5.jpg

6 lug leaf spring rear, 3.73 gear non posi $100 and you can have the leafs, hangers, etc with it.
http://img461.imageshack.us/img461/6...ture048po3.jpg

Hood latch, $15
http://img406.imageshack.us/img406/8...ture052ci7.jpg

Hood, no damage I can see. $100
http://img103.imageshack.us/img103/8...ture049yk4.jpg

Re: Parting out 70 LWB
 

Does the grill have any broken pieces in it? I might be interested in it...

Re: Parting out 70 LWB
 

3 speed off a I6. Includes bellhousing, clutch, and flywheel. $30
http://img487.imageshack.us/img487/2...ture050bj9.jpg

Very nice LWB Box, straight except for one spot, rust free, nice floor and front panel. $300 or $250 without wheel housings.
http://img57.imageshack.us/img57/8319/picture020co1.jpg
http://img129.imageshack.us/img129/3...ture027lg3.jpg
http://img484.imageshack.us/img484/1...ture023hl6.jpg

Re: Parting out 70 LWB
 

K10, I'll look it over and get more pics for you.

Re: Parting out 70 LWB
 

I also may be interested in the grille.

Thanks,

-Jamie

Re: Parting out 70 LWB
 

K10 and J, here's some up close pics of the grill. I found one crack in the plastic as shown below. Hope this helps!

http://img142.imageshack.us/img142/1...ture057ca1.jpg
http://img291.imageshack.us/img291/3...ture058vj0.jpg
http://img184.imageshack.us/img184/3...ture059sp5.jpg
http://img291.imageshack.us/img291/3...ture060sc3.jpg
http://img184.imageshack.us/img184/1...ture061sl3.jpg

Re: Parting out 70 LWB
 

How much for the hub cap shipped to 92646?
Thanks,
Hurdy

Re: Parting out 70 LWB
 

Big,thanks for the pics.I am going to pass.I am considering making my 71 look like a 70 but need a perfect 70 grill.

Re: Parting out 70 LWB
 

No problem K10. Hurdy, the caps with shipping would be $27.

Re: Parting out 70 LWB
 

That sounds good. Where do I send payment?
Thanks,
Hurdy

Re: Parting out 70 LWB
 

What about the speaker?

Is it in any kind of shape?

Re: Parting out 70 LWB
 

how much for a/c

Re: Parting out 70 LWB
 

Hi! Wow nice truck...wish I lived closer Id buy the whole thing!:whine: Anyway...wondering if you'd sell the upper Passenger Side Trim off the bed? Mine is dented in two places and yours looks good. Zip is 37618. Ive gotten some shipped to me before in a piece of PVC pipe for my old Nova...Id be willing to pay for the cost of the pipe if youd ship! Thanks my friend!

Re: Parting out 70 LWB
 

Cool Hurdy the caps are yours, I sent you a PM. Cooter, I'll check on the speaker for you on Monday when I get back out to my shop. Deer Slayer you can have all the ac parts on the firewall and under the dash for $100 plus shipping. I'll try to get it all pulled and post a pic so you can see what is there. Sadsack, I'd like to try to sell the bed complete if possible. Give me a couple weeks and if it doesn't sell I'll hook you up. Thanks to everybody for their interest! big

Re: Parting out 70 LWB
 

sounds good on the a/c when ever you get pics ill look jw if you would be interested in a 5 lug lwb chassis complete roller for trade for the bed it is disc front and leaf spring rear

Re: Parting out 70 LWB
 

Are you willing to sell the cab intact?

Re: Parting out 70 LWB
 

Do you have a tail light harness? Both of them, from the front to back and the one from tail light to tail light? If so, how much with shipping to Rolla, MO 65401?

Re: Parting out 70 LWB
 

:hiya: im in the Roanoke Va. area lookin for a 70 c10 crossmember to change my truck over to automatic , turbo 350 , anyone have one or know where i can find one please email me or call if within driving distance of Virginia , monte714me@aol.com or whinegar72@hotmail.com or call (540) 493-1094 thanks willis

Re: Parting out 70 LWB
 

Deer Slayer, I hope to get the ac stuff together tomorrow. I'll pm you when I post pics. I've got a couple leaf frames now, not sure what to do with them. Thinking about shortening one for a race project. jdstx, the cab got hit pretty good in the pass door pillar. The floor is bowed, the rocker crushed. I don't know if this is what you are looking for. Jarrett, I'll check on the harnesses and pm you. MY1970, I've got a tranny crossmember but it would cost a bit much to ship to you. You should be able to find one local and save some money. Going rate on these seems to be 25-50 bucks.

Re: Parting out 70 LWB
 

TAILGATE?do you have the one off of that truck if so how much to 32218 if it's not bent rusted etc.

Re: Parting out 70 LWB
 

Sorry Kurt, the gate was the best part on the truck and I'm saving it for one of my projects.

Re: Parting out 70 LWB
 

Probably not what I want. That's a shame, it appears to be in decent shape.
Thanks.

Re: Parting out 70 LWB
 

Cooter, I pulled the speaker today and the cone is trashed. Deer Slayer, here's the pics of all the ac parts on the truck. The cowl flapper and bushings are there. One of the dash outlets is missing and one small plasic box from under dash is broken. The second pic shows a crack around a bolt in one side of the evap housing and a dent in the top evap aluminum line. Everything for $100 and you can have the parts on the core support if you want them for the same price. SJarrett, it's raining cats and dogs here and is too wet to get under the truck. I'll pm you when it drys up some.

http://img50.imageshack.us/img50/1023/picture062fb2.jpg
http://img508.imageshack.us/img508/4...ture063ta1.jpg

Re: Parting out 70 LWB
 

okay thanks big head

Re: Parting out 70 LWB
 

interested in the am radio. how much to 94061
thanks
ken