The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - Wanted/ 3/4 ton rear leaf springs (https://67-72chevytrucks.com/vboard/showthread.php?t=246746)

BLAZERMAN

06-23-2007 09:38 PM

Wanted/ 3/4 ton rear leaf springs

I'm looking for a good set of rear 3/4 ton 7 leaf springs. These are 52" eye to eye and 2-1/2" wide. I believe 73 up will work but dont rememmber how far until they started using 56" springs. Close to Kansas City would be great since I need these ASAP!

BCOWANWHEELS

06-24-2007 12:47 AM

Re: Wanted/ 3/4 ton rear leaf springs

i got some in tn. too far away ?
bob

nu2-72

06-24-2007 12:04 PM

Re: Wanted/ 3/4 ton rear leaf springs

Rob, I have mine. Going to the full spring lift. You may want to look at them.

PICKMUP

06-24-2007 04:59 PM

Re: Wanted/ 3/4 ton rear leaf springs

You want "4X4" 3/4T springs only...the 2WD 3/4T springs are 2.25".

BLAZERMAN

06-28-2007 12:26 AM

Re: Wanted/ 3/4 ton rear leaf springs

Quote:

Originally Posted by PICKMUP (Post 2236594)

You want "4X4" 3/4T springs only...the 2WD 3/4T springs are 2.25".

Thanks for the info PICKMUP, I didnt realize there was a difference between the 2 wheel drive and 4x4 trucks.
Never found any so I went out and bought a brand new set of Eaton springs.

earl87gta

06-29-2007 02:50 AM

Re: Wanted/ 3/4 ton rear leaf springs

I just took a set of the burb to put 6in lift springs one wish I would have seen this earlier could have helped you out.

meathead95

06-29-2007 03:00 PM

Re: Wanted/ 3/4 ton rear leaf springs

i have a set from my 1970 k20

All times are GMT -4. The time now is 06:17 AM.