The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   5 lug disc fornt setup (https://67-72chevytrucks.com/vboard/showthread.php?t=247476)

deer slayer 06-28-2007 08:13 PM

5 lug disc fornt setup
 
for sale i have a five lug disc setup crossmember and all froom hub to hub $200
thanks jeff

deer slayer 07-02-2007 05:31 PM

Re: 5 lug disc fornt setup
 
anyone

deer slayer 07-02-2007 10:01 PM

Re: 5 lug disc fornt setup
 
its clean just alittle cleaning and some paint and your good to go need it gone

deer slayer 07-03-2007 10:57 PM

Re: 5 lug disc fornt setup
 
need it gone

deer slayer 07-07-2007 06:15 PM

Re: 5 lug disc fornt setup
 
im gonna take it to the scrapyard

bglad420 07-08-2007 03:43 AM

Re: 5 lug disc fornt setup
 
How much are you looking to get?

deer slayer 07-08-2007 10:24 AM

Re: 5 lug disc fornt setup
 
i had someone gonna give me 200 from the spindles out tell me what you want

JON70CST 07-08-2007 11:50 AM

Re: 5 lug disc fornt setup
 
Just what i'm looking for!! where abouts are you located? i'm in lethbridge, alberta canada so i'm guessing this is quite a ways away. any possible way we could work somethin out?

deer slayer 07-08-2007 11:51 AM

Re: 5 lug disc fornt setup
 
sure
what are we talking

deer slayer 07-14-2007 12:10 PM

Re: 5 lug disc fornt setup
 
last chance

bighead 07-14-2007 12:58 PM

Re: 5 lug disc fornt setup
 
Jeff, I've had bad luck selling these. Too heavy to ship, not much local demand. Before you scrap it out you might want to pull the spindles. They can be swapped into the drum brake front ends and are alot easier to ship if you can find a buyer. I could use a pair of the dust shields from behind the rotors if they are not bent up. I'd give a 20 spot for them plus shipping if you want to pull them. Hope this helps a little, big

JON70CST 07-15-2007 04:14 PM

Re: 5 lug disc fornt setup
 
if you can just throw the spindles into a drumb front end then i'll take the spindles, i've been told that doesn't work though.

deer slayer 07-15-2007 09:34 PM

Re: 5 lug disc fornt setup
 
im pretty sure all you need is the spindles i dont see what would be different anywhere else like the a arms and stuff like that

Skruffy 07-15-2007 11:47 PM

Re: 5 lug disc fornt setup
 
I thought it was just the ball joints that were different, but whadda I know?

lilred67 07-16-2007 08:47 AM

Re: 5 lug disc fornt setup
 
Quote:

Originally Posted by Skruffy (Post 2265286)
I thought it was just the ball joints that were different, but whadda I know?

you have to change the lower ball joint to a '71-72 and possibly change outer tie rods depending on pwr steer or not.

deer slayer 07-20-2007 05:25 PM

Re: 5 lug disc fornt setup
 
still for sale

deer slayer 07-23-2007 04:58 PM

Re: 5 lug disc fornt setup
 
make me an offer i cant put down

deer slayer 08-05-2007 09:01 PM

Re: 5 lug disc fornt setup
 
final call

deer slayer 08-10-2007 09:06 PM

Re: 5 lug disc fornt setup
 
ok ill keep posting till this goes to scrap

deer slayer 08-12-2007 08:54 PM

Re: 5 lug disc fornt setup
 
will work on the price

faribran 08-13-2007 12:33 AM

Re: 5 lug disc fornt setup
 
Where in FL are you located?

deer slayer 11-05-2007 10:39 PM

Re: 5 lug disc fornt setup
 
last call

deer slayer 11-25-2007 11:22 AM

Re: 5 lug disc fornt setup
 
still here


All times are GMT -4. The time now is 11:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com