The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   WTB Pair of 69-72 Fenders (https://67-72chevytrucks.com/vboard/showthread.php?t=247702)

4bynut 06-30-2007 04:52 PM

WTB Pair of 69-72 Fenders
 
Hey everyone i need a pair of front fenders for my mud truck (69-72). They need to be nice. But the front cup can be bad since i'll be removing it. All the ones i have are bad by where fender meets the door. Anyway I'm in northwest IL, so the closer the better. Thanks Jason

WORNBRAKES 06-30-2007 05:00 PM

Re: WTB Pair of 69-72 Fenders
 
5 Attachment(s)
I have 2 drivers and 1 pass fender. Like you mentioned, the closer the better as I have shipped a few and it runs from $45-80. If interested, I need 45 for the pass side, 35 for the blue drivers (someone took a grinder to it but it is straight) and 50 for the other drivers side. All plus shipping. I think the set could be boxed together and go greyhound a little cheaper. LMK
Thanks

Green Machine 06-30-2007 11:28 PM

Re: WTB Pair of 69-72 Fenders
 
Did you see these? - I am going to part out this clip since no one wants it complete - send me a PM if you are interested in the fenders - I'm about 400 miles away - Road trip ???

GM

http://67-72chevytrucks.com/vboard/s...d.php?t=244866

wibilly 07-01-2007 01:02 AM

Re: WTB Pair of 69-72 Fenders
 
one of the bigest swap meets in the country is in your back yard in a week or so. Iola wi

4bynut 07-02-2007 11:14 AM

Re: WTB Pair of 69-72 Fenders
 
Wornbrakes - I'm interested in the grey fender and the white fender. Does the white one have a dent at the bottom by the door? Or is it just a illusion from the pic? Also i'm not sure if i have a greyhound pickup close to me.

GreenMachine - thanks, but i'm looking for a set without any rust at the bottom by the door.

Wibilly - I'm not going to be able to go.


Thanks Jason

WORNBRAKES 07-02-2007 12:59 PM

Re: WTB Pair of 69-72 Fenders
 
What you see on the white one is a shadow from the other fender. Leave me your zip and I will check DHL ground. I have sent a few that way. Look at this website and see if there is a city near yours that has a station. You cant search by zip you have to know the city.
http://www.shipgreyhound.com/
Thanks

WORNBRAKES 07-02-2007 11:17 PM

Re: WTB Pair of 69-72 Fenders
 
Jason,
I did some calculating on the fenders. All of this is using the zip code 61081 I found. I checked DHL, FedEx and Greyhound.
1 fender weighs 33 pounds and measures 62x33x8 building a box around it.
2 fenders mated together weigh 70 pounds and measure 62x33x17 in a box.
DHL Ground
92.00 together
FedEx Ground
129.00 together
Greyhound to De Kalb
73.00 together

If you can think of another method, I am up for it. My zip is 75189 but I will drop it off in Dallas if needed.
Thanks

4bynut 07-03-2007 04:24 AM

Re: WTB Pair of 69-72 Fenders
 
Thanks, for checking all that. Dekalb is not that far from work so grey hound would be OK. I'd like to wait and see if anyone closer may have something tho. But if i can't find something within a reasonable drive i'll get yours. Thanks again Jason

projectking 07-03-2007 05:45 AM

Re: WTB Pair of 69-72 Fenders
 
I know of a good pair of 69-72 fenders near Morris, Il

4bynut 07-03-2007 12:34 PM

Re: WTB Pair of 69-72 Fenders
 
Quote:

Originally Posted by projectking (Post 2248336)
I know of a good pair of 69-72 fenders near Morris, Il

Who has them and how much. Thanks Jason

wibilly 07-05-2007 01:09 PM

Re: WTB Pair of 69-72 Fenders
 
i have two driverstde and one repo pass side no rust ds of one has hole from bumper rubbing through and other has some filler on bottom cup on a dent

projectking 07-05-2007 04:53 PM

Re: WTB Pair of 69-72 Fenders
 
Quote:

Originally Posted by 4bynut (Post 2248611)
Who has them and how much. Thanks Jason

I'm trying to get in touch with him.

4bynut 07-06-2007 04:56 AM

Re: WTB Pair of 69-72 Fenders
 
Quote:

Originally Posted by projectking (Post 2251565)
I'm trying to get in touch with him.

Thanks

4bynut 07-06-2007 05:00 AM

Re: WTB Pair of 69-72 Fenders
 
Quote:

Originally Posted by wibilly (Post 2251308)
i have two driverstde and one repo pass side no rust ds of one has hole from bumper rubbing through and other has some filler on bottom cup on a dent

Could you post pics please. Jason


All times are GMT -4. The time now is 08:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com