The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Power Boost Brakcet Setup (https://67-72chevytrucks.com/vboard/showthread.php?t=248581)

gonline71

07-07-2007 12:54 AM

Power Boost Brakcet Setup

I have a 1971 longbed with power brakes. My painter did quite a bit of the dismantling and I am now trying to reassemble. I need pics of the power booster bracket linkage...specifically where is connects to the pedal pushrod and the master cylinder pushrod.

Thanks

pritch

07-07-2007 10:50 PM

Re: Power Boost Brakcet Setup

I don't know if this will help, but it's the best picture I have of it. There is a square-headed pin that goes where the screwdriver is.

http://i3.photobucket.com/albums/y55...rbrakes007.jpg

gferris5

07-07-2007 11:37 PM

Re: Power Boost Brakcet Setup

Also, check out the LMC catalog for some good diagrams. Might help. I had to do the same thing recently.

gonline71

07-08-2007 01:12 AM

Re: Power Boost Brakcet Setup

Quote:

Originally Posted by pritch (Post 2254578)

I don't know if this will help, but it's the best picture I have of it. There is a square-headed pin that goes where the screwdriver is.

http://i3.photobucket.com/albums/y55...rbrakes007.jpg

Thanks, that is what I needed. Did not know which way the bracket faced.

All times are GMT -4. The time now is 10:57 AM.