The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - 68 chevrolet parts sheetmetal nice TX (https://67-72chevytrucks.com/vboard/showthread.php?t=249071)

68 chevrolet parts sheetmetal nice TX

i bought a parts truck that had the front knocked off of it. i saw this truck run around for years and it was clean, what a shame. all parts are original paint, what you see is what you get. the cab had a limb fall on it and dent cowl and roof slightly and one very small dent in back of cab where bed hit it. it has minor rust in passenger vent and kick panel, but other than that it is super straight and rust free. dash has not been cut. doors are super. straight, rust free, and not speaker holes. driver door has one small spot that is an easy repair. hood is mint as far as i can tell, super straight and no dents or dings. bedsides are very nice and straight, rust free, each side has a very small dent. tailgate has dents on inside and top and some rust at bottom, but outside is very straight. would be a good candidate for a spray liner. i will be keeping the bed floor and head gate. have 5 six hole rallyes, and four matching tires with good tread. any questions feel free to ask. i am located in brownwood, tx.

cab complete with doors-$500
bedsides-$200 each
hood-$200
tailgate-$75
wheels/tires-$125

shipping would be hard for most items, but if you have any ideas then let me know. thanks in advance. please respond in thread so there are no misunderstandings. i also don't want to part any further than items listed.