The 1947 - Present Chevrolet & GMC Truck Message Board Network - HELP! WANTED! 1968 Burb Lower Moldings SOS

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - HELP! WANTED! 1968 Burb Lower Moldings SOS (https://67-72chevytrucks.com/vboard/showthread.php?t=249269)

K5 Blazer

07-12-2007 12:15 PM

HELP! WANTED! 1968 Burb Lower Moldings SOS

Hey guys,

I need some help tracking down a decent set of lower moldings for my 1968 burb. Any help would be appreciated. Does any one reman these things?

Thanks

da-burb

07-12-2007 06:39 PM

Re: HELP! WANTED! 1968 Burb Lower Moldings SOS

I have some nice driver wuality 68 suburban mouldings. I don't have any current pictures. I will take a look and a couple pics to boot and post them here.

da-burb

07-12-2007 11:32 PM

Re: HELP! WANTED! 1968 Burb Lower Moldings SOS

5 Attachment(s)

Here they are. The center stripe is painted red. I think it looks very nice. No major damage or dents. Most of any defects will work out with a little thumb work. The annodizing is very bright for the age. Let me know if it is good enough and we can talk about a price.

This is the left side.

da-burb

07-12-2007 11:37 PM

Re: HELP! WANTED! 1968 Burb Lower Moldings SOS

5 Attachment(s)

The worst of the left side. Very rear piece is pushed in. I think it will straighten pretty well.

The next 4 pictures are on the right side starting from the back and working my way forward.

da-burb

07-12-2007 11:41 PM

Re: HELP! WANTED! 1968 Burb Lower Moldings SOS

3 Attachment(s)

and the last of the right side.

All times are GMT -4. The time now is 10:20 AM.