The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Where Do These Brackets Go? (https://67-72chevytrucks.com/vboard/showthread.php?t=253779)

panteratron 08-13-2007 09:02 PM

Where Do These Brackets Go?
 
1 Attachment(s)
I Found These Brackets With All Of The Others For My Motor And I Cant Seem To Figure Out Where And How They Go. The Motor Is From A 85 Blazer With Air I've Got All The Rest Figured Out. Pic Would Be Great!

cjracing15 08-13-2007 09:49 PM

Re: Where Do These Brackets Go?
 
There for a 4X4. They go between the block and the mounts. the point end goes to the back of the motor. there should also be two rods. they bolt to these mounts and down to the dust cover.

Srubydo1986 08-13-2007 10:12 PM

Re: Where Do These Brackets Go?
 
i could figure it out but after that i agree that were i saw them, back when my jimmy was around

panteratron 08-13-2007 11:27 PM

Re: Where Do These Brackets Go?
 
Thanks!!! Would Any One Happen To Have A Picture Of The Rods That Go To These?

Srubydo1986 08-13-2007 11:33 PM

Re: Where Do These Brackets Go?
 
ill have to look but they are about 11/2 feet long and have two hole one on each end and are flat at the very tip of the bar

benoit454 08-14-2007 11:17 PM

Re: Where Do These Brackets Go?
 
Had thoose on our 86 k10, the rods were gone, when we put in a 350 we left thoose off it.


All times are GMT -4. The time now is 08:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com