lowering
 

if i lower the front end of my truck do i have to change the steering column? i guess what im wonderin is if i lower my truck 2 inches over all is it really that simple or do mundane little things have to be changed? any help would be appreciated....

------------------
69 c-10. turquoise. 350 motor with 400 trans. long fleet. headers and dual flowmaster exhaust. K & N air cleaner, aluminum wheels and radials, stereo system and a bed liner.

nope just change the springs and shocks. you might have to replace inner & outter ties rods, idler arm, and pitman arm if warn out

------------------
Britney: 1970 2wd K/5 Blazer (Frame up)
Jessica: 1967 2wd SWB (daily driver)
Helga: 1972 4x4 3/4ton LWB (daily driver)

AIM:Alexmart1
Mountain View, Cali

If you get lowered spindles from someone like early classic then all you need is the spindles.

------------------
'69 CST Short fleetside
Lowered, 400 small block, 700R4, 3" dual exhaust, 40 series Flowmasters, 4 wheel disc brakes, all stainless hard and flex lines, front & rear sway bars, Dana 9 1/4" rear end 4.11's w/Detroit Locker, soon to have 18" rims
Not my daily driver. More like my weekend A$$ KICKER.
See my truck at: http://www.geocities.com/low69cst/
Future Automotive Engineer attending the University of Kentucky.
Feel free to message me on AOL, SN- SS95ZQ8
My Dad's projects:
72 Short Fleet 4x4 Chyenne Super
72 Long Fleet 4x4 Chyenne Super
Both 350 autos restored original