The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Misc B.S. for sale (Colo) (https://67-72chevytrucks.com/vboard/showthread.php?t=257718)

glock35ipsc 09-10-2007 11:30 AM

Misc B.S. for sale (Colo)
 
4 Attachment(s)
Here are a bunch of extra stuff I came across while cleaning the shop this weekend. Everything here is good stuff for drivers, no show stuff here. Well, except maybe for the pulleys, the A/C controller, and the drive shaft. All parts are $$ plus shipping. Please post your interest in this thread, along with City and ZIP Code for a shipping quote.

** Vintage Air standard A/C controller, new - $50
** A/C dash center section. Looks bad in the pic, but it is a couple years of dust on it. It's in real good shape, see the second pic where the ash tray part is bent. Will straighten up easily - $10
** A/C vent center housing - $5
** Ash tray, excellent condition! SOLD!!!!

glock35ipsc 09-10-2007 11:34 AM

Re: Misc B.S. for sale (Colo)
 
3 Attachment(s)
** Battery tray, SOLD!!!!
** Beauty rings, 15". SOLD!!!!
** Carrier bearing, new, Car Quest part number 35-6036 - $10
** Dash bezel, in great shape, but was painted silver. Could be cleaned up, no cracks - $5
** Distributor and coil, tight, lobes are sharp - $20

glock35ipsc 09-10-2007 11:38 AM

Re: Misc B.S. for sale (Colo)
 
4 Attachment(s)
** Head light trim rings, 67-68 Chevy, good for a driver, one has some dings. See second pic - **SOLD**
** Various lenses. Tail light lenses look to have cracked, and have been superglued? Front turn lenses are for a 67-68. Good lenses for a driver - $15 for all
** Lower pulley, single groove, aluminum. Not sure what all it will work on - **SOLD**

glock35ipsc 09-10-2007 11:43 AM

Re: Misc B.S. for sale (Colo)
 
4 Attachment(s)
** Rear drive shaft. This is a NEW rear section for a 2-piece drive shaft, made for lowered LWB trucks. The front yoke is a captured slip yoke with about 3" - 4" of travel. No more trashed carrier bearings! New, with new u-joints, never installed - $125
** Spring perches, NEW, Moroso for leaf springs, 3" axle tube (no picture yet) - $10
** Steering column lower cover plate - SOLD!!!!
** Short water pump pulley, chrome, single groove, as new except for the dust - $5

glock35ipsc 09-10-2007 11:45 AM

Re: Misc B.S. for sale (Colo)
 
2 Attachment(s)
** Fleetside tailgate trunions, good contition, not worn out - **SOLD**
** Set of wing windows, great glass, include rebuild kit (felts and rubbers), both sides - $100 set, will not seperate

Alberta Newbie 09-10-2007 01:15 PM

Re: Misc B.S. for sale (Colo)
 
How much to ship the battery tray and ash tray to Edmonton, Alberta, Canada ?

glock35ipsc 09-10-2007 01:21 PM

Re: Misc B.S. for sale (Colo)
 
Get me your postal code, and I will weight it tonight and figure out the most economical way to get it there.

Bamm 09-10-2007 01:58 PM

Re: Misc B.S. for sale (Colo)
 
2nd in line for the battery tray Bob, Thanks, .......Jerry

Alberta Newbie 09-10-2007 02:02 PM

Re: Misc B.S. for sale (Colo)
 
My Postal Code is T8A 5V5

lks dcvn 09-10-2007 02:11 PM

Re: Misc B.S. for sale (Colo)
 
** Steering column lower cover plate - $3

I will take it - please PM a total with shipping (to 43615) and I can get you the $ ASAP.

Thanks!

Bob Moore 09-10-2007 02:24 PM

Re: Misc B.S. for sale (Colo)
 
Interested in the trim rings. Shipped to Tacoma, WA 98407. Can do Paypal.

Thanks - Bob

meathead95 09-10-2007 03:44 PM

Re: Misc B.S. for sale (Colo)
 
ill get in line for the battery tray

Alberta Newbie 09-11-2007 02:21 PM

Re: Misc B.S. for sale (Colo)
 
ttt

glock35ipsc 09-11-2007 03:16 PM

Re: Misc B.S. for sale (Colo)
 
Jerry - I got you down as #3 for the battery tray.
lks dcvn - I will get the figure tonight and let you know tomorrow.
Bob Moore - ^^ Ditto ^^
meathead - Got you down as #2 for the battery tray.

glock35ipsc 09-12-2007 11:10 AM

Re: Misc B.S. for sale (Colo)
 
PM's sent to those looking for shipping costs.

glock35ipsc 09-14-2007 01:27 PM

Re: Misc B.S. for sale (Colo)
 
ttt, all parts that have been paid for have shipped!

glock35ipsc 09-22-2008 01:19 PM

Re: Misc B.S. for sale (Colo)
 
Bump, still have some of this stuff.

jamie72 09-22-2008 03:54 PM

Re: Misc B.S. for sale (Colo)
 
how much on the chrome pully to 47224?

glock35ipsc 09-23-2008 09:03 AM

Re: Misc B.S. for sale (Colo)
 
Jamie - Sent you a PM.

71cadc10 10-21-2008 11:51 AM

Re: Misc B.S. for sale (Colo)
 
that rear drive shaft piece, you think it can withstand some off/on racing at the strip, with drag radials? Or is a 'street only' type piece?
thanks

glock35ipsc 10-21-2008 12:23 PM

Re: Misc B.S. for sale (Colo)
 
It's a pretty solid unit, I would probably run it without question. I fully intended to do some Friday night Street ET racing at Bandimere until my truck got hit. Never got the chance to install it though. Dang drunks! :banghead:

Jamie - Did you ever get the PM I sent you? I never heard back from you.

72BlckButy 10-21-2008 02:04 PM

Re: Misc B.S. for sale (Colo)
 
How's the chrome on the vent windows?

glock35ipsc 10-21-2008 02:13 PM

Re: Misc B.S. for sale (Colo)
 
Pretty good from what I remember, it's been awhile since I opened the box. I'll look again tomorrow, I won't be home until way late tonight.

72BlckButy 10-21-2008 02:30 PM

Re: Misc B.S. for sale (Colo)
 
That's okay, if you can get some pics when you get a chance that would be great. These are original pieces correct?

olblue60@aol.com 10-22-2008 08:32 AM

Re: Misc B.S. for sale (Colo)
 
I'm interested in the drive shaft. Could I get a couple of measurements, say center to center of the U joints, compressed mand extended? thanks.


All times are GMT -4. The time now is 03:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com