The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   2 SHORT BED rolling frames for sale 2wd coil (https://67-72chevytrucks.com/vboard/showthread.php?t=258532)

72freak 09-15-2007 08:15 PM

2 SHORT BED rolling frames for sale 2wd coil
 
Now that is has cooled down a bit I am getting ready to finish stripping down 2 of my Parts trucks. Both are Southern trucks. Both are 2x4, 6 lug, drum brake and coil spring. I do not know the rear end ratio in either.

1970 V8, automatic fleet side
1969 was 6cyl., manual, step side, but has been converted to V8, auto.

Both have had some type of hitch welded on the rear and cut back off. Both seem to be fairly rust free and structurally sound.

$300 each

I also have another 1970, short, step, 2x4, 6cyl, manual, coil frame with that has been hit badly in the front right. Frame is bent and NOT REPAIRABLE. It would be good for the back 1/2 for a long/short bed cut frame conversion or repair You might could use the back end as a donor chassis for an extreeme bagged project. $100

The trucks are still together so pictures of the frames are not possible at this time.

Zip is 30067

67Black 09-16-2007 09:05 PM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
u have pics

RJGeister 09-16-2007 10:25 PM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
David,
Does the one of them have a good grill? Does the I6 have Power steering?

Thanks,
Rich

72freak 09-17-2007 08:27 AM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
Quote:

Originally Posted by 67Black (Post 2361469)
u have pics


"The trucks are still together so pictures of the frames are not possible at this time."

The bed is off the the good 1970 so that area can be seen
The frint clip is off the 1969 and I should have it all completly stripped by the end of the week

I will take some pics...what areas do you want to see?

72freak 09-17-2007 08:31 AM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
Quote:

Originally Posted by RJGeister (Post 2361640)
David,
Does the one of them have a good grill? Does the I6 have Power steering?

Thanks,
Rich

No power steering and poor driver grill at best on the 1970

72freak 09-24-2007 06:20 PM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
1969 was 6cyl., manual, step side, but has been converted to V8, auto. It has the 3 speed cross member and an Auto cross member.

This frame is ready for pick up if anyone needs it.

DREAMS OF A 67 09-26-2007 08:16 PM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
Do you have a good short step bed?

72freak 09-26-2007 09:43 PM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
Quote:

Originally Posted by DREAMS OF A 67 (Post 2376252)
Do you have a good short step bed?

I had 2 advertised all last week..........sold the really nice one and I still have the well used one left.

72freak 10-03-2007 11:00 PM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
ttt

Blue85 10-04-2007 12:29 PM

Re: 2 SHORT BED rolling frames for sale 2wd coil
 
how messed up are the rear frame rails where the hitch was welded on?


All times are GMT -4. The time now is 10:45 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com