The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Overdrive for 3-speed (https://67-72chevytrucks.com/vboard/showthread.php?t=258887)

rickf 09-18-2007 02:15 PM

Overdrive for 3-speed
 
I've seen a couple mentions of Chevy 3-speeds with an overdrive. I'd like to know more about them.

My truck is a 64 C10, 3 on the tree.

What years/models of vehicle would come with an overdrive that is compatible with my truck's 3-speed? (If any.)

Does the overdrive directly replace my stock tailshaft?
I mean, will it bolt right up, is the same length, same bushing diameter, same splines, and my same drive line is going to fit?

Could the tailshaft/overdrive exchange be done with the transmission still in the truck?

What was the normal in cab control for the overdrive?

My C10 does indeed haul its share of 1/2 ton loads, will the overdrive hold up?


All times are GMT -4. The time now is 02:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com