The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - NP205 slip yoke eliminator (https://67-72chevytrucks.com/vboard/showthread.php?t=260080)

abebummy26

09-27-2007 12:41 AM

NP205 slip yoke eliminator

I want to put a slip yoke eliminator on my truck I have a NP205 now. can I just take the 205 out of 3/4 ton 78 GMC and use the tailshaft and all the other stuff associated with It? Tearing apart a case isn't a problem for me I've done it once. So any help would be appreciated.

CUSTOM/10

09-27-2007 06:48 AM

Re: NP205 slip yoke eliminator

I believe you can. I haven't done it yet but have 4 205's on my bench right now an plane on building 3 good case out of them. One has the slip yoke that I plan on converting to a fixed yoke.

Gary

hilbilly

09-27-2007 03:30 PM

Re: NP205 slip yoke eliminator

Yea you can. The back output's are universial. It's the front input that has 4 differnet styles w/ corsponding bearings.

All times are GMT -4. The time now is 11:29 AM.