The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Removing Timing Cover (https://67-72chevytrucks.com/vboard/showthread.php?t=260494)

skokie

09-30-2007 02:32 AM

Removing Timing Cover

I am thinking about removing my timing cover for 2 reasons. One is to make sure I dont have a loose timing chain. Two is that I want to line up TDC once and for all on this motor :crazy: I have been having a issue with a balancer. Since I have never done this before is there any thing that might come out oil etc?

Thanks

corn	09-30-2007 02:52 AM

Re: Removing Timing Cover

If you loosen the front two pan bolts & carefully pry the cover off, you can re-install it when you are done in there. Make sure you put some silicone on the corners & tighten the pan bolts again after you get the cover back on...

70GMCer

09-30-2007 08:04 AM

Re: Removing Timing Cover

no oil should come out.....

Sport/Truck

09-30-2007 08:18 AM

Re: Removing Timing Cover

1 Attachment(s)

This is what happened when I took my cover off! :lol:
s/t

All times are GMT -4. The time now is 12:21 PM.