The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   NEW Steering components Idler Arm, Etc. (https://67-72chevytrucks.com/vboard/showthread.php?t=260729)

mkhutch 10-01-2007 02:17 PM

NEW Steering components Idler Arm, Etc.
 
Hey guys, here is a brand new complete front end 2WD steering components, The new parts from LMC are as follows:

34-2020 TIE ROD END-OUTER 2 REQ
34-1920 TIE ROD END-INNER 2 REQ
34-1120 ADJUSTING SLEEVE 2 REQ
34-1124 ADJUSTING SLEEVE-W/PS 2 REQ
34-2120 IDLER ARM
34-1161 IDLER ARM SUPPORT
30-0329 HEX BOLT
30-0938 TORQUE LOCKNUT
34-2224 PITMAN ARM-W/PS

The only thing used is the centerlink which has been sand-blasted and painted black. PM with any questions.

Asking $200 shipped OBO.

toomanytoyz 10-01-2007 03:06 PM

Re: NEW Steering components Idler Arm, Etc.
 
I just ordered the Same Stuff this Morning, Let Me see if i Can Cancel.
If i Can i will take it, Will let u Know by Tomorrow Morning...........

Rick

mkhutch 10-01-2007 03:08 PM

Re: NEW Steering components Idler Arm, Etc.
 
Sounds good, good luck!

toomanytoyz 10-01-2007 03:18 PM

Re: NEW Steering components Idler Arm, Etc.
 
Just got Done Trying To Cancel with no Luck, Sorry About That...........:(

Rick

mkhutch 10-01-2007 03:58 PM

Re: NEW Steering components Idler Arm, Etc.
 
That bites. Thanks for trying!

BCOWANWHEELS 10-01-2007 04:01 PM

Re: NEW Steering components Idler Arm, Etc.
 
if there for a 71-72, c10 would you take 150.00 delivered to kingsport, tn. 37664 ? if so i,ll take em.
bob

mkhutch 10-01-2007 04:06 PM

Re: NEW Steering components Idler Arm, Etc.
 
Most of the parts are standard 67-72, but as long as you have PS the pitman arm, etc should work. As far as $150 shipped, thats a little too low for me right now.

mkhutch 10-02-2007 11:13 AM

Re: NEW Steering components Idler Arm, Etc.
 
ttt

DennyB 10-02-2007 02:01 PM

Re: NEW Steering components Idler Arm, Etc.
 
How much without the centerlink and "34-1120 ADJUSTING SLEEVE"
It would be my understanding with power steering I would only need the "34-1124 ADJUSTING SLEEVE-W/PS 2 REQ", Correct?

mkhutch 10-02-2007 02:18 PM

Re: NEW Steering components Idler Arm, Etc.
 
I have no need for the centerlink either, just trying to get out as a whole. Say $185 shipped?

DennyB 10-02-2007 03:47 PM

Re: NEW Steering components Idler Arm, Etc.
 
Not to beat you up But the pieces I would need Would come to $181.40 Shipped. I would then save on shipping on the ball joints and a-frame bushings.

If you would take $170 shipped, I'll take them to help you get rid of them

Denny

mkhutch 10-02-2007 06:59 PM

Re: NEW Steering components Idler Arm, Etc.
 
DennyB, lets do it! PM me your addy, etc.

Marty

DennyB 10-03-2007 01:53 AM

Re: NEW Steering components Idler Arm, Etc.
 
PM sent


All times are GMT -4. The time now is 10:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com