The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Diamond plate flooring? (https://67-72chevytrucks.com/vboard/showthread.php?t=261902)

1987_3/4ton_chevy

10-10-2007 11:49 AM

Diamond plate flooring?

Hey guys, I have a 1968 3/4ton GMC. I was thinking about putting a diamond plate flooring in but i don't know? I am wondering what i should do,,,, yes or no?:confused:

Bus Ted Knuckle

10-10-2007 12:34 PM

Re: Diamond plate flooring?

Quote:

Originally Posted by 1987_3/4ton_chevy (Post 2396863)

Hey guys, I have a 1968 3/4ton GMC. I was thinking about putting a diamond plate flooring in but i don't know? I am wondering what i should do,,,, yes or no?:confused:

I say go for it. Especially if your current floor has issues. I wouldn't do it to a bed that is in good condition (but that is just me!)

It's your truck, if it is what you want, then do it.

1987_3/4ton_chevy

10-10-2007 01:18 PM

Re: Diamond plate flooring?

ya the Floor has some holes in it from rusting so i think i am gonna do that. I ain't doing that to the bed though. Where would i find that diamond plate for the inside of the truck?

1987_3/4ton_chevy

10-11-2007 08:54 AM

Re: Diamond plate flooring?

I changed my mind again, i am just gonna put down carpit down. Can't find diamond plate for a flooring of a truck

All times are GMT -4. The time now is 06:24 AM.