The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H (https://67-72chevytrucks.com/vboard/showthread.php?t=263126)

ante_up13 10-18-2007 10:44 PM

Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
1 Attachment(s)
I have a pair of used 1" drop springs from ECE. They were on my truck for two years until I replaced them with stock ones. They look new except for a little road grime. My price is $50...buyer pays shipping. Thanks for lookin'.

suville 10-18-2007 11:26 PM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
shipping to 83647 Thanks

ante_up13 10-18-2007 11:36 PM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
Quote:

Originally Posted by suville (Post 2409799)
shipping to 83647 Thanks

Fed Ex Ground $14.63

Here is the weight and box dimesions in case you want to go with another shipper(ie UPS, USPS)

Shipping weight @30lbs
Approx Box Dimesions 15"x12"x7"

My Zip 92620

Dylan

ante_up13 10-18-2007 11:40 PM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
These coil springs are for the front end and are meant for a small block application.

svgould 10-19-2007 12:45 AM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
Put me next in line please. Shane

brak 10-19-2007 03:49 AM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
Mee Three :)
zip: 55438

70c10 10-19-2007 07:24 AM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
ante up13- I don't need springs but could you measure the spring height while placed on a flat surface?. I'm curious how tall a 1" drop spring is. Thanks!

64GMCHorsepower 10-19-2007 10:10 AM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
IF they get to me, shipping to 35806...but I will take them if I get the chance...

Chad

ante_up13 10-19-2007 01:55 PM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
Quote:

Originally Posted by 70c10 (Post 2410041)
ante up13- I don't need springs but could you measure the spring height while placed on a flat surface?. I'm curious how tall a 1" drop spring is. Thanks!

I measured it sitting upside down because the spring is not level right side up. The measurement I got was 11 and 11/12 inches...just a hair under a foot...that is from the top of the coil to the tip of the bottom where the coil ends.

Hope it helps

If I don't here from suville soon (48hrs)...it will go to next in line

suville 10-19-2007 10:59 PM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
I'll pass, Thanks

70c10 10-19-2007 11:06 PM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
Quote:

Originally Posted by ante_up13 (Post 2410449)
I measured it sitting upside down because the spring is not level right side up. The measurement I got was 11 and 11/12 inches...just a hair under a foot...that is from the top of the coil to the tip of the bottom where the coil ends.

Hope it helps

Thanks for the info!:metal:

svgould 10-20-2007 12:00 AM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
I think I'm next in line, and I will take them. My zip code is 83642. PM me with total and how to make payment.

Thanks,

Shane

ante_up13 10-20-2007 11:34 PM

Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H
 
Quote:

Originally Posted by svgould (Post 2411155)
I think I'm next in line, and I will take them. My zip code is 83642. PM me with total and how to make payment.

Thanks,

Shane

Shane,

You are next...PM with info will be sent ASAP

Dylan


All times are GMT -4. The time now is 07:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com