mirror installation
 

I bought a new set of mirrors (stock style), so that I can actually see behind me. (peep mirrors now) I was wondering if I was missing something. Does the mirror bolt on just by screwing the screws into the door sheetmetal? Or is there some type of backing plate that goes IN the door and then the mirror gets screwed to that? Any help is greatly appreciated:confused:

Re: mirror installation
 

yes, there is a backing plate for the chrome sport mirrors. I was lucky, and found mine on the bottom inside of the doors. The previous owner must've took the mirrors off and let the plates fall inside.

Pete

Re: mirror installation
 

yup there are some backing plates that the screws go in. still easy. good luck sweet slead in your avatar

Re: mirror installation
 

thanks, but no luck of them falling in the door. The PO was cool enough to put little metal plugs in the 3 holes when they put on the trailer mirrors. I bought the "kit" but i guess that backing plate isn't part of it!
Thanks Premium72, that was my 49 Club Coupe F**d with the flatty, 3 and 4"drop all the way around. Wife, kid, and no garage so I had to sell it. 49 merc is in the near future.

Re: mirror installation
 

Theres also rubber that goes between the mirrors and the door skin to seal it off.

Re: mirror installation
 

When I bought new mirrors mine came with new backing plates,the old ones was real rusty but I think I still have them.If you cant find any let me know and you can have my old ones. Hutch949

Re: mirror installation
 

a little trick. put double sided sticky tape on the backing plate, then position. you'll have to take the door panels off to get it into place.....

Re: mirror installation
 

:agree: If you don't do this it takes two people