![]() |
Installing bikini top w/ snaps
Question for those who have installed soft tops with snaps on the windshield frame. Can you still install the hard top? Will it fit over the snaps tightly? Any other options or suggestions for installing the soft top without drilling?
|
Re: Installing bikini top w/ snaps
You use the screw in type of snaps and remove them before you put the hard top back on.
|
Re: Installing bikini top w/ snaps
I don't take the screws out before putting on the hardtop and never noticed a problem with the fit...but maybe that's because everything else has a problem:(
|
Re: Installing bikini top w/ snaps
I never take the snap halves off to put my hard top on either.and no leaks. at least not there.
|
Re: Installing bikini top w/ snaps
Quote:
For a couple years when I drove mine as a daily, I would remove the snaps and silicone each screw hole thinking it would make a difference...:crazy: |
Re: Installing bikini top w/ snaps
VT, I've been doing the same thing. I guess I've been wasting my time.
|
Re: Installing bikini top w/ snaps
Cool, Thanks!
|
Re: Installing bikini top w/ snaps
Quote:
I'd still be doing it most likely if I were driving one year 'round. |
Re: Installing bikini top w/ snaps
I must be the only one that has problems with the buttons interfering with the hard top. I get a nice gap at the windshield with the hard top on and the buttons in. I have to remove them for a good fit. I am sure that a lot of it has to do with where you place them.
|
Re: Installing bikini top w/ snaps
Quote:
|
All times are GMT -4. The time now is 03:07 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com