The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   factory gauges & circits f/s (https://67-72chevytrucks.com/vboard/showthread.php?t=266925)

billsbowtie 11-17-2007 03:08 PM

factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/aatp6.jpg
speedomters $10.00 each plus ride .everything in this tread is untested but they look perty good.

billsbowtie 11-17-2007 03:09 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/aatp5.jpg
fuel gauges $10.00 each.

billsbowtie 11-17-2007 03:10 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/aatp3.jpg
c-10 oil pressure gauges $10.00 each.

billsbowtie 11-17-2007 03:12 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/aatp8.jpg
battery charging gauges $5.00 each.

billsbowtie 11-17-2007 03:12 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/aatp7.jpg
temp gauges $5.00 each.

billsbowtie 11-17-2007 03:14 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/aatp4.jpg
2 gauge type and non gauge type circits $30.00 shipped for all 4 .

jorgensensc 11-17-2007 04:42 PM

Re: factory gauges & circits f/s
 
Could I entice you to sell me one of the gauge circuit cards for 10.00 shipped. That is what I need right now. I'm running around with no cluster right now because I went to clean up mine and my circuit card disintegrated. SO I couldn't finish putting it back together. I also need a nice Gauge cluster Housing, black and silver/chrome that does not have the choke switch. Let me know.
Shawn

billsbowtie 11-17-2007 07:06 PM

Re: factory gauges & circits f/s
 
shawn i will check on the cluster and get back with you in a little bit.

billsbowtie 11-17-2007 07:32 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/aj1.jpg
shawn you can add one of the 2 upper clusters for $10.00 plus $8.00 shipping. or i can send you the circit for $10.00.

billsbowtie 11-17-2007 07:38 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/aj2.jpg
i also have these whole bezels f/s the gauge type are $30.00 plus $15.00 shipping. and the non gauge type are $20.00 plus $15.00 shipping.

Sadsack 11-17-2007 08:10 PM

Re: factory gauges & circits f/s
 
Have a closeup pic of the woodgrain one? I might be interested

billsbowtie 11-17-2007 08:21 PM

Re: factory gauges & circits f/s
 
i will try to get one tomarrow of it.

70c10 11-17-2007 09:27 PM

Re: factory gauges & circits f/s
 
Bill- is there any broken circuits on the full gauge printed circuit?. Can I get the same deal as Shawn?. If so, PM the payment info. Thanks

jorgensensc 11-17-2007 09:41 PM

Re: factory gauges & circits f/s
 
Bill,
Thank you for the pics. I think I will just stay with the circuit for now. I think I will have to get a new bezel (I'm too picky). They used to be 25.00, but I think they are much more now! Thank you again for the pics. Can I send you Paypal?
Shawn
PM sent, looking for more stuff to send with this. :)

billsbowtie 11-18-2007 11:51 AM

Re: factory gauges & circits f/s
 
pm sent jim.

70c10 11-18-2007 12:43 PM

Re: factory gauges & circits f/s
 
Didn't get PM yet.

billsbowtie 11-18-2007 12:45 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/abz1.jpg
here you go sadsack.

billsbowtie 11-18-2007 12:45 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/abz2.jpg

billsbowtie 11-18-2007 12:50 PM

Re: factory gauges & circits f/s
 
http://img.photobucket.com/albums/v37/billyeh/abz3.jpg
70c10 here is the other gauge circit i high lighted the only place that i wasn't sure about. let me know what you think.

70c10 11-18-2007 01:52 PM

Re: factory gauges & circits f/s
 
Thanks for the close up pic Bill. If it's questionable, I think I will pass on it but thanks again.

jamie72 11-18-2007 07:19 PM

Re: factory gauges & circits f/s
 
bill got any inner tins??

billsbowtie 11-18-2007 11:34 PM

Re: factory gauges & circits f/s
 
jamie how many do you need gauge or non gauge type?

billsbowtie 11-18-2007 11:35 PM

Re: factory gauges & circits f/s
 
70c10 you're welcome if i take anymore apart i will keep you in mind on a circit.

josu_ito 11-21-2007 12:18 AM

Re: factory gauges & circits f/s
 
Hello Billsbowtie, I would like to buy one temp gauge, this is my first time buying here, I don't know what's next, I'll pay via Paypal or other payment methods, ship to 92706....

Please advise...

billsbowtie 11-21-2007 06:14 PM

Re: factory gauges & circits f/s
 
shawn i mail your parts snail mail today.
jamie pm sent.
josu pm sent.


All times are GMT -4. The time now is 04:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com