![]() |
What's the difference?
What's the difference between a half ton and three-quarter ton pickup? Is it the frame? Are the bodies bigger or what?
Thanks |
Re: What's the difference?
what year truck?:cool:
|
Re: What's the difference?
In general terms, you get a heavier rated suspension-stiffer springs etc. My 1951 3/4 has a long bed-I don't know if they all had that.
|
Re: What's the difference?
Quote:
|
Re: What's the difference?
my:
59 3/4 ton has a - .25" thick frame, long bed (about 8"), 8 lug hubs, 4 speed tranny 55 1/2 ton has a - .125" thick frame, short bed (about 6'), 6 lug hubs, 3 speed tranny |
Re: What's the difference?
chevy or GMC? I was told the frames on GMC trucks are better built
|
Re: What's the difference?
Frames are longer and also shaped different on the 3/4 ton. The 1/2 had a short bed with only two stake pockets, the 3/4 has a long bed with 3 stake pockets. The sheetmetal is the SAME from 1/2 to 3/4 minus the bedsides and running boards.
My 49 3/4 has 1ton suspension with a 3 on the tree, were most 3/4 have 4speeds on the floor. |
Re: What's the difference?
My '54 started out life as a 3/4 ton long bed with over load leafs front/rear & 8 lug wheels! It's now a sb 1/2 ton with a TCI front end and a few less leafs out back.
|
Re: What's the difference?
both mine are chevy's
|
All times are GMT -4. The time now is 11:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com