Need bezel and instrument housing.
 

I need to mockup my Autometer guage setup. I don't want to pull my current setup until the new guages are ready to go in. I need an old bezel and stock instrument housing. I will pay for shipping but don't feel like pay for the parts. I'm going to cut them up and not use them. I only need to find a better way to install an Auto Pro Comp guage setup. I will credit anyone who provides any parts on the article writeup.

Re: Need bezel and instrument housing.
 

i have something for you i think let me look in the disaster known as my basement
If i do have a bezel its for a non air conditioned truck.

Re: Need bezel and instrument housing.
 

I've got one out of a 74 that is cracked off where the radio was - do you just need the gauge area or the whole dash?

Re: Need bezel and instrument housing.
 

I just need the guage area. As long the housing can be fitted to the bezel it will work. I can't remember, does the bezel screw into the housing?

Re: Need bezel and instrument housing.
 

Don't think so... the 74 has screw clips that mount on the metal dash and the bezel screws into those. 4 at the top, 2 each side, and 4 around the base of the steering wheel mount...

Mine looks like this, except the radio section is missing.

http://i38.photobucket.com/albums/e1.../a75a_1JPG.jpg

Re: Need bezel and instrument housing.
 

The top of the bezel screws to the housing, the rest screw to the metal part of the dash.

Re: Need bezel and instrument housing.
 

Let me know if you want to part with it. I'll send you shipping costs for it.

Thanks!

Anyone have a housing available?

Re: Need bezel and instrument housing.
 

It's all yours! I can't imagine shipping is any more than $15 going USPS. PM me your address and I can take it to the post office tomorrow.

Re: Need bezel and instrument housing.
 

i wont part with any of my covers but it looks like you got that covered.. i have a instrument guage setup if you still need it.. i want to keep the speedo , fuel guage, temp guage, clock and ammeter if you only need it for the backing part you cna have the oil pressure one as it appears broken.. ill get a guess at shipping if you wanna send me your addy

Re: Need bezel and instrument housing.
 

Keep what you want. I'll take the housing. PM sent with address.

Thanks!!

That's one big FLASH!!