The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   parting out 1970 c10 long box (https://67-72chevytrucks.com/vboard/showthread.php?t=274488)

dukes69 01-17-2008 11:38 AM

parting out 1970 c10 long box
 
time to clean house. everything will be sold. let me know what you would like and i will give you a price.
or call lucas 507-475-1081
http://i130.photobucket.com/albums/p...r/truck001.jpg

phase_one 01-17-2008 12:09 PM

Re: parting out 1970 c10 long box
 
Wish you were closer. I could use some of the larger stuff.

Guy58 01-17-2008 02:34 PM

Re: parting out 1970 c10 long box
 
Do you have an under the bed type spare tire carrier with all the bolts, ext..?
Thanks,
Guy
87111

sandking 01-17-2008 03:08 PM

Re: parting out 1970 c10 long box
 
Are both of the door mirrors with back plates present? Shipped to 92882?

byrd 01-17-2008 04:48 PM

Re: parting out 1970 c10 long box
 
How is the inner grill? top trim on both fenders? Slightly Interested in the inner grill, but really interested in the fender top trim

byrd 01-18-2008 07:24 AM

Re: parting out 1970 c10 long box
 
Ttt

71swb4x4 01-18-2008 07:40 AM

Re: parting out 1970 c10 long box
 
Here is what I need if you have it:

Complete air cleaner, including spacer between it and carb and the heater riser and heat riser tube
PS hoses
PS brackets
I would take a PS pump too if you needed to sell all that PS stuff complete.

71swb4x4 01-18-2008 07:41 AM

Re: parting out 1970 c10 long box
 
On second hand, would you sell the whole truck? How much?

Old Chevy Mech 01-18-2008 08:03 AM

Re: parting out 1970 c10 long box
 
If you dont sell it all, I'm interested in the Whole grill, and the front Bumper if you are willing to ship to 06417
Thanks!

Frank

Bus Ted Knuckle 01-18-2008 08:36 AM

Re: parting out 1970 c10 long box
 
I need the upper and lower pieces of the door trim, and the lower piece from the rear wheel to the cab on the bed side. (All on the passenger side...does that matter?) how much with shipping to 71968?

josu_ito 01-18-2008 08:55 AM

Re: parting out 1970 c10 long box
 
I need the window mechanism and the open-closed door mechanism too (driver's side both). Price + ship to 92706. Thank you....send PM

byrd 01-18-2008 08:39 PM

Re: parting out 1970 c10 long box
 
Dukes69 it is kind of rude to not respond when you have been on the board twice since people have requested parts and prices.

rlm316 01-18-2008 10:38 PM

Re: parting out 1970 c10 long box
 
If its auto, I am interested in the pointer and housing for the gear indicator. Shipping to 08098. Thanks, Lane.

clos69 01-19-2008 12:13 AM

Re: parting out 1970 c10 long box
 
I am interested in the rear slider window...how $$$ and to ship to 76106,tx....pics also thanks

dukes69 01-19-2008 12:40 AM

Re: parting out 1970 c10 long box
 
guy58- no spare tire stuff
sandking-only have a good drivers side $10 8.95 for shipping
byrd- fender trim is good $20+shipping grill has one piece broke out wait for pics.
71swb4x4- air cleaner $15
no spacer, heat tube $15
ps hoses, pump and the brackets that i have $30 shipping is extra let me know what you want.
old chev mec. bumper $40 no brackets shipping43.89 grill$150 shipping52.46
busted knuckle only the upper door trim is good $10 plus shipping
josu_ito-door stuff $ 40 shipped
rlm316 no pointer, indicator 7.50 shipped.

please pm if you would any of these.

71swb4x4 01-19-2008 08:49 AM

Re: parting out 1970 c10 long box
 
PM sent on PS stuff and air cleaner stuff.

Bus Ted Knuckle 01-19-2008 09:05 AM

Re: parting out 1970 c10 long box
 
suppose I'll pass on the trim then

1971ChevyTruck 01-19-2008 10:06 AM

Re: parting out 1970 c10 long box
 
Is it automatic?? 350?? If so how much for the tranny linkage??

1972Ryan 01-19-2008 10:23 AM

Re: parting out 1970 c10 long box
 
What is the condition of the doors and what would it be shipped to 28787? also what about the inner fenders?
Thanks,
Ryan

rlm316 01-19-2008 10:33 PM

Re: parting out 1970 c10 long box
 
Thanks, do you also have the fiber optic cable or is that missing/ broken.
Lane.

byrd 01-20-2008 11:52 AM

Re: parting out 1970 c10 long box
 
Sounds good, how much for shipping to 40272

clos69 01-22-2008 06:49 PM

Re: parting out 1970 c10 long box
 
Duke-
Can you show some pics of the rear slider window and how much to ship to 76106,TX

750horsepower 01-22-2008 10:18 PM

Re: parting out 1970 c10 long box
 
how is the wiring harness i need the whole thing inside and out and how much?

9ballmasterizz 02-21-2008 12:18 PM

Re: parting out 1970 c10 long box
 
Do you have a gauge cluster with working gauges? If so, how much and how much is shipping to 74948?


All times are GMT -4. The time now is 02:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com