The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Welcome Area (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=50)
-   -   no initiation process? I like it! (https://67-72chevytrucks.com/vboard/showthread.php?t=275921)

bmxkingnow 01-26-2008 04:20 PM
no initiation process? I like it!
 
well initially I signed up to get some questions answered. but cruising around the site has pretty much answered most of my questions. Big thanks to all the guys and their info in the 73-87 area.

My rig is a 76' short box chevy 2wd, in line 250 with a 3 on the tree. It has manual discs up front and no power steering. My intentions with the truck are to make it a solid daily driver that I can have fun in when need be. I will be doing an sbc swap, along with something with a floor shifter. Also, I'm thinking I want to get into the rear end and go with a little higher gear set. Perhaps a 2.73 or so.

I look forward to countless information and reading.:metal:

L0WRIDE 01-26-2008 04:43 PM
Re: no initiation process? I like it!
 
:welcome2:to the boards

72lb4x4 01-26-2008 05:05 PM
Re: no initiation process? I like it!
 
Welcome!

The manual steering isn't so bad if you get used to it. Pop the clutch, get some weight off the front and then steer. It may take some planning on where to park as well., but that 6 tuned will get a bit better milage than a V8...

72BlckButy 01-26-2008 10:08 PM
Re: no initiation process? I like it!
 
:welcome2: to the board from Mid-MO!!!

krue 01-26-2008 11:45 PM
Re: no initiation process? I like it!
 
Welcome to the board from South Mississippi!:D

jsbgump 01-27-2008 01:27 AM
Re: no initiation process? I like it!
 
Welcome to the board from Texas

shaneschevys 01-27-2008 01:31 AM
Re: no initiation process? I like it!
 
Welcome from FT Worth TX.

Old Chevy Mech 01-27-2008 05:03 AM
Re: no initiation process? I like it!
 
:welcome2: from CT!

Frank

Cyclone44 01-27-2008 07:20 AM
Re: no initiation process? I like it!
 
:welcoem: from Knoxville Tn...

BigDaddyDave 01-27-2008 07:46 AM
Re: no initiation process? I like it!
 
Welcome to the board from NC.

86swb 01-30-2008 11:38 AM
Re: no initiation process? I like it!
 
Welcome from Western Kentucky.

Ron 586 01-30-2008 06:58 PM
Re: no initiation process? I like it!
 
Welcome to the board from West Tennessee.

BACKYARD88 02-01-2008 02:25 AM
Re: no initiation process? I like it!
 
:welcome2: from South Texas!

LUV2XCLR8 02-01-2008 06:57 AM
Re: no initiation process? I like it!
 
:welcome2: From West TN :hi2:

DREAMS OF A 67 02-16-2008 06:16 AM
Re: no initiation process? I like it!
 
Welcome From Knoxville Tn!!!

bmxkingnow 02-16-2008 09:29 AM
Re: no initiation process? I like it!
 
hey guys thanks for the great welcome and all the information.

earl87gta 02-28-2008 02:26 PM
Re: no initiation process? I like it!
 
:welcome2: From East TN.


All times are GMT -4. The time now is 07:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com