![]() |
truck buddy buckets
3 Attachment(s)
Here is a set of truck body buckets that were removed from my 65, obvious not original to the truck. Will need new seat covers or maybe just the cloth replaced the vin. Don’t mind the junk in the console; it doesn't come with the purchase. Prefer not to ship since these aren't the separate buckets but always open to suggestions.
SOLD pending payment from DREAMS OF A 67 Updated 1/29.... I think these might be orignal cushions however I cannot read the "gm-22" on the bottom but there is a distinct rectangle like the gm-22 pads. I think you could just recover the p/s both foams are in good shape. The d/s top is in recoverable condition but the bottom d/s would need to be reinforced on the bottom cushion (something a upolstery shop could do) |
Re: truck buddy buckets
looking for anything in trade?
|
Re: truck buddy buckets
3 Attachment(s)
Those kind of look like the Dodge buddy buckets, or at least the way the upholstery is done does. Do you have a picture of the bottom? Here's some Chevy ones for reference:
|
Re: truck buddy buckets
1 Attachment(s)
no pics of the bottom tonight. here is one of the side mounting brackets. They did bolt into the existing bolt holes though. if that would help identify matters..
|
Re: truck buddy buckets
Shape of the seat cushions looks like the Dodge version.
|
Re: truck buddy buckets
Do they tilt forward?
|
Re: truck buddy buckets
1 Attachment(s)
Hart_rod.. I think they are the chevys... I found this post
http://67-72chevytrucks.com/vboard/s...d.php?t=252608 The ones i have have the same base/ part that bolts to the floor as the chevys. the doges look totaly different here... The D/S back folds foward the P/S if fixed, I wouldn't say that it tilts |
Re: truck buddy buckets
It's probabley just the way the upholstery is done. Do they have GM22 on the seat cushion?
|
Re: truck buddy buckets
I just looked quickly with a flashlight and I didn't see the GM22 on it. Possibly is has been redone once before and that would explain the difference
Graham |
Re: truck buddy buckets
i have a set of the dodge seats and these are no where close.
|
Re: truck buddy buckets
5 Attachment(s)
Here is some more pics
|
Re: truck buddy buckets
5 Attachment(s)
some more
|
Re: truck buddy buckets
I have never seen chevy ones fold over on the drivers side like that- I had a set in my first truck and I have a set in the basement that I just looked at and that set doesn't fold either. Not saying they're not chevy- just different than what I have seen.
|
Re: truck buddy buckets
i have an am/fm id trade yah for these seats
|
Re: truck buddy buckets
Mine fold and I know they are Chevy. I think the ones ordered in burbs or panels are setup that way, but not 100% sure.
|
Re: truck buddy buckets
someone make an offer. I really have no place to store
|
Re: truck buddy buckets
How much, shipped to Kansas City, KS?
|
Re: truck buddy buckets
LILRED66,This would have to be crated because of how long it is, but as long as it is termanal to termanal looks to be about 125-160 depending on the final weight..
Graham |
Re: truck buddy buckets
How much for seats, including shipping to Kansas City, KS?
|
Re: truck buddy buckets
all pm replied to...
|
Re: truck buddy buckets
These are likely`67s,since some`67 bench seats folded forward.Other than that the only 67/68 differences are in the cover design.These were definately nicely recovered at some point.Nice set!(I`m used to saying that to women)
|
Re: truck buddy buckets
price updated
|
Re: truck buddy buckets
SOLD pending payment from DREAMS OF A 67
|
Re: truck buddy buckets
Did the sale go thru? If not, how much you want for them. I'm only about a hour away in east texas.
|
Re: truck buddy buckets
sorry their sold...
|
All times are GMT -4. The time now is 08:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com