do you have buckets from another vehicle?
 

Howdy,
Do you have buckest from another vehicle? If so what vehice make and Year. If you have pictures can you tell me where to find them?

------------------
Looking for bucket seats for '67 chevy

I have a set of buckets from an S-10 4x4. I haven't installed them yet, but i will be sure to post a pic once installed.

------------------
72 C/10 LWB 2wd
250 inline 6, 3 speed column shift. Soon to have a total facelift.

yep, see this post... http://67-72chevytrucks.com/board/ub...ML/006595.html
...they have headrests too.
------------------
WOU in Monmouth, Or
68 Camaro,250(No,I'm not putting in a 350!)
67,LWB,250(Again, I'm not putting in a 350!)
a work in progress
"Praise The Lowered"



[This message has been edited by Brad (edited April 30, 2002).]

buckets from chevy trucks from 88-91 fit great because they fit under the rear window and don't have headrests. 92up fit good also if you don't mind the headrest protruding above the rear glass. they are fairly plentiful now too, at least in the south.

Only trouble with that swap is the deat is just a little too high. Otherwise, it is perfect.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

i used 6 way power seats from 85 pontiac grand am. power seats saves a lot of time trying to get height set right.

these are out of a 91 chevy lumina minivan
http://www.freephoto-i.net/users/Hvy...4/cabseats.jpg

------------------
Lutz, Fl
My Team Website
The Heavy Chevy Website
------------------

• 72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi
  91 454 Edel Intake 850 cfm carb Comp Cam 268/.500 Hedman Headers Dual 3'' Exhaust
• 71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works...
  Put it to the floor...

I have buckets from a dodge shelby ,one of those little hatchback ones, not sure what year.

Buckets from trucks and blazers 73-[till they changed to highbacks]work well and can be made to look stock. 72 down brackets and covers can be made to fit,and they don't demand such a high price at the boneyard, I have gotten sets for free. The set in this truck have 72 houndtooth covers and bench seat brakets to make them sit at the correct height.

http://www.freephoto-i.net/users/tom84/ts2.JPG

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

can the newer style buckets be easily adapted to fit our seat bracketry.

------------------
72 chevy lwb 350 lunati cam ported and polished cast 2.02 heads proform hei edelbrock performer rpm and 750 carb balanced bottom end 9.5:1 compression ps,pb th350 with a tci 2500 stall convertor full man v-body kevlar clutches and bands as well as other goodies

These are late 80's to early 90's Bonneville seats. No modifications to install, just drill holes.
http://www.freephoto-i.net/users/72c...20interior.jpg

------------------
72 Chevy C/10
87 Chevy Silverado 4X4
www.geocities.com/chevylwb/chevylwb.html
Aberdeen South Dakota
WANTED: Drop Spindles
F/S: rebuilt Turbo 400 & Aluminum wheels w/ tires

I've got a set of swivel buckets, probably out of an early Chevelle. Fit great in my beater blaz and comfy. I had to make up some brackets though

------------------
MOUNT VERNON, WASH. STATE
GOT MY BASES COVERED
-Big and bad 70 CST Blazer
-71 K5 Blazer, 350, 4spd, 2" lift, 35" BFG mudders, Camo,
-Work in progress 72 SWB
-72 Cheyenne, lwb, 1/2 ton, 4x4, V8, 4spd.
-71, 3/4 ton, 402/400, Custom Camper
-69, 2wd, ST6, auto, ghetto lowered, 3/4 ton, LWB, "BOMBER"
-69 Chev. short narrow 4x4
-69 Chev., lwb, utility trailer, 35" tires,
Add or Delete Daily