The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   Going to sell the 63 longbed (https://67-72chevytrucks.com/vboard/showthread.php?t=277036)

poorboy 02-03-2008 01:07 PM

Going to sell the 63 longbed
 
Well I just bought a 72 longbed as a daily driver and I have the 63 short bed coming so this one needs to go. I got it from the original owners grandson so it's pretty much unmolested. The only thing besides swap motors that I have done is install a 1 wire alt. The windshiels is cracked but I have another one. I have a couple extra doors and extra bedsides. It's a 3/4 ton. I'l sell everyrhing I have for the truck to a board member for $700 with out the new motor. I have a 350 that smokes that you can have if you want. I can take pics of whatever you want.
http://i74.photobucket.com/albums/i2...20C20/side.jpg

poorboy 02-08-2008 07:06 AM

Re: Going to sell the 63 longbed
 
I need the room so this really needs to go. It cost me $300 in back DMV fees to reg it so I'll sell it for that with no extra parts except the bed panels.

jchav62 02-08-2008 07:47 AM

Re: Going to sell the 63 longbed
 
All the good deals are so far away!

LILRED66 02-08-2008 09:52 AM

Re: Going to sell the 63 longbed
 
NM to CA on the map only appears to be a few inches. KS to CA is several inches, so I guess I won't be able to grab this one, but it looks well worth $300.00, poorboy is asking. I hope someone takes advantage of this opportunity to get them a nice '63 C20.

poorboy 02-08-2008 10:32 AM

Re: Going to sell the 63 longbed
 
http://i74.photobucket.com/albums/i2...0C20/radio.jpg

poorboy 02-08-2008 10:33 AM

Re: Going to sell the 63 longbed
 
http://i74.photobucket.com/albums/i2...20C20/dash.jpg
http://i74.photobucket.com/albums/i2...20C20/seat.jpg

poorboy 02-08-2008 10:35 AM

Re: Going to sell the 63 longbed
 
Not pictured but i have both door panels that match the int. This is a good deal for someone. Put a motor in and drive it.

duallyjams 02-09-2008 06:46 AM

Re: Going to sell the 63 longbed
 
Do you have more pics. I see the bottom of the fenders but what about the inner fenders or around the windshield,floor pans,tail gate.
James

Project SIKty-5 02-22-2008 08:46 AM

Re: Going to sell the 63 longbed
 
Are you willing to part with the extra bedsides?? What sides do you have, both bedsides, or just one side??

poorboy 02-22-2008 10:56 AM

Re: Going to sell the 63 longbed
 
I have both but I really don't want to seperate. If it does not sell I will find a place to keep it for awhile and build it later.

poorboy 02-25-2008 11:01 PM

Re: Going to sell the 63 longbed
 
Well the short bed needs some parts so I guess this will be a donor. I'll sell the whole bed kit for 200.

BUG1500 02-26-2008 09:12 AM

Re: Going to sell the 63 longbed
 
Do You Want To Sell The Grill Off The 63

poorboy 02-26-2008 11:21 AM

Re: Going to sell the 63 longbed
 
No it's going on the other truck.


All times are GMT -4. The time now is 09:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com