CST Emblem Placement
 

Could someone please give me a measurement for the placement of the CST emblem located on the top edge of the doors. The measurment from the door edge closest to the door handle to the edge of the emblem should give me what I want. I just want to make sure before I start drilling holes.

Thanks,

Bob S.

Re: CST Emblem Placement
 

It looks like 13 3/16" from the rear edge of the door to the edge of the emblem. Hope that makes sense.

Re: CST Emblem Placement
 

Drilling Holes In Fresh Paint Or Sheetmetal Makes Me Sick
Ive Often Wondered If You Could Silicone Them On Or Trim Adhesive
Maybe Even Some Good 3m Double Stick Of Some Sort
I Had A Crappy Old Scout Once And Used Subfloor Adhesive(pl 400)
And Glued Some Mouldings Back On But I Didnt Care Much About The End Result And That Stuff Wasnt Coming Back Off Without A Pry Bar

Re: CST Emblem Placement
 

Thanks, I'm sending it off to be painted next week so now is the time to put the holes in it. I kinda like the idea of using an adhesive. If anyone has done it this way please let me know.

Re: CST Emblem Placement
 

hope this helps. The holes looked centered in the groove.