![]() |
Advanced Adapters 205 ??????????????????
has any one used AA's 05-0405 adapter for the 4l60e to 205 trans case? They told me it would need to be mofited a little?? I dont see at all u have to grind the @#$% out of it! Anyone had this problem???
|
Re: Advanced Adapters 205 ??????????????????
Picts? I'd call thier tech line before you grind it into an unusable peice?
|
Re: Advanced Adapters 205 ??????????????????
done that the say it has to me modifed??? Buy there parts and throw away the stock ones and it should work!!
|
Re: Advanced Adapters 205 ??????????????????
We ordered the 0405 and the 6900 to adapt the 205 to our new 4L65E. Have not gotten it together yet. Is there anything I should know about this part before I install it?
|
Re: Advanced Adapters 205 ??????????????????
if u use the stock adapter that can with the stock 205 u will have to take about 5/8s off the stock adapter. that is what i had to do on myn i would post a pic but cant figure it out. AA told me if i order there 205 adapter for 279 dollors i wouldnt have to modify it. I couldnt see throwing out the stock part?? I wish they would make it work for the adapter they send u BUT It will work with some grinding
|
Re: Advanced Adapters 205 ??????????????????
You need to adapt the adaptor?What application was it designed to actually work on?
|
Re: Advanced Adapters 205 ??????????????????
they say to adapt a 700 or 4l60 to your 205 trans case it works but with some work
|
Re: Advanced Adapters 205 ??????????????????
I have not had to modify one yet. The instructions say they may need notched, but all the ones I received were already notched. You should be able to use a stock TH350 adapter, but depending on what transmission you use, may require either changing output shafts or like some people have done, build an extension adapter.
|
Re: Advanced Adapters 205 ??????????????????
what i am using is a 4l60e trans to a 205 tcase the part that they send u dont need to be cut on but to put it to the tcase u need to modify your stock adpt and sleeve DONE IT or DOING IT
|
All times are GMT -4. The time now is 05:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com