parting out a 67 3/4 longbed (vallejo CA)
 

HI Gang,

ALL SOLD, THANKS...

67 DS fender
67 PS fender
67 Radiator Core Support
67 DS Door complete
67 PS Door complete
67 DS Bedside
67 PS Bedside
Front bed panel

SOLD
Grille
Hood
Door Mirrors
Rear Window Slider
Front coil springs
Tailgate

NO shipping, these are located in Vallejo.

http://www.johnnyrods.com/67truck/im...t/IMG_0078.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0079.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0080.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0081.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0082.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0083.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0084.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0085.JPG

Here is the truck (on the right) before he parted it out to rebuild the 72 on the left.
http://www.johnnyrods.com/67truck/im...ilestrucks.jpg

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Do you have the jack and lug wrench from this 67? If so I would be interested in them.
Thank You,
Guy

Re: parting out a 67 3/4 longbed (vallejo CA)
 

more pictures of tailgate
http://www.johnnyrods.com/67truck/im...t/IMG_0089.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0090.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0091.JPG

http://www.johnnyrods.com/67truck/im...t/IMG_0092.JPG

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Hi, I am in need of a set of front coil springs for my '72, 3/4 2wd burb.

Did that truck have springs, and if so will they fit onto my burb??

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Do you have a good front bumper ?

Re: parting out a 67 3/4 longbed (vallejo CA)
 

John, I'd like a crack at the clip and bed, any way to to meet me part way?? I am in AZ??

Re: parting out a 67 3/4 longbed (vallejo CA)
 

John,

Is that a factory rear slider window, and if so how much? Whats the interior like, any pics?

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Any more pictures of the tailgate?

Re: parting out a 67 3/4 longbed (vallejo CA)
 

JMB, it does still have front suspension, so how does $15 +$20shipping sound?

RawRaw (I sounded like a cheerleader typing that. :) )
I will check. It is a white painted bumper.

70rs/ss, I don't have any plans on heading that way for a while. Sorry.. See if you can round up someone (on the transportation board)....


Robert, it is a small window slider, can't say if it is factory or dealer...(don't know).... You can have it for $25 plus shipping (shipped thru my work so it won't be as expensive as other ways of shipping)

Hart_Rod, I will try to get more pictures of the tailgate. Outside is straight, inside may have some dents. It does have surface rust from thin paint, no pitting though...
We are trying to sell the tailgate with the bed, but may sell it seperatly.

Re: parting out a 67 3/4 longbed (vallejo CA)
 

If you decide to seperate the tailgate, let me know. I need one for my crewcab, pending pictures. Thanks,

Rob

Re: parting out a 67 3/4 longbed (vallejo CA)
 

John
I am going to be up in Sac on monday,so maybe on my way home to newark
if the bumper is nice I can stop and take a look at it.

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Id like to know if there is any major rust in the doors??
if not then I'm very very interested.

Email me: a_seufert@yahoo.com

Re: parting out a 67 3/4 longbed (vallejo CA)
 

I would be interested in the door mirrors,if you could ship to TN.

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Fender emblems? What were they, and are they available? Also interested in the rear window if rob passes. Eric

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Sent you a PM John...

thanks

Re: parting out a 67 3/4 longbed (vallejo CA)
 

John,

I'll take the rear window, shipping to 49783 Michigan
Thanks

Re: parting out a 67 3/4 longbed (vallejo CA)
 

John, I am hoping to still be first of the clip and bed, especially if you'll split the tailgate. I am trying to work a deal with another member for his 67 clip as well. I can make the trip with my flatbed, just hoping you could meet me part way, maybe pomona?? PM me as I lose this thread too easy.

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Please put me next in line for the mirrors if you decide to separate them from the doors.

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Looking for 67 Delux Wiper knob, Choke knob and Hand throttle mailed to 98387. In line for the rear slider if it get down this far.

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Still around John??

Re: parting out a 67 3/4 longbed (vallejo CA)
 

John,
Any word on a jack or lug wrench out of that truck?
Thanks for your time,
Guy

Re: parting out a 67 3/4 longbed (vallejo CA)
 

I'm definately interested in the fenders or whole front clip for my 67 C10.

I could drive down and pick it up.

Cheers
Chad

Re: parting out a 67 3/4 longbed (vallejo CA)
 

Hang Tight everyone.... My buddy took a trip out of town without telling me. I will touch base with him tonight and post more info tonight...

Sorry about that Guys...

Re: parting out a 67 3/4 longbed (vallejo CA)
 

I am heading to San Diego March 2-6 so I can take anything to Cali or bring it back as far as AZ!!! LMK, John if I can't find someone to get it down to San Diego, then I may not be able to come up to San Fran area? LMK

Re: parting out a 67 3/4 longbed (vallejo CA)
 

looking for a 1967 ignition spacer. I have the switch and the bezel but a 68-72 spacer doesn't fit a 1967...wtf gm stopped making the 67 version in 1996. Any help would be huge

thanks

hdsumday@yahoo.com