The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   rattle in steeringcolumn (https://67-72chevytrucks.com/vboard/showthread.php?t=279782)

KCW 02-22-2008 01:02 PM

rattle in steeringcolumn
 
First I want to thank the people that have posted on this in the past. I have been dealing with a rattle in my steering column for about the last 5000 miles. My truck only has 15000 miles on it so I wasnt sure if I was the victim of a bad steering shaft. I took the plunge and bought the Borgeson Mullens shaft for my truck. I opened the box and was impressed with the quality of the shaft and universal joint. After removing the stock unit i couldnt belive the poor quality of the stock shaft in comparison. The new shaft was a direct replacement and installed very easily. The upper slip joint was about .008 bigger so it was kinda tight, but doable. I can tell you that my truck feels like a new truck again and the steering feels sporty and tight again. I give this upgrade my full approval and would reccomendto anyone.


All times are GMT -4. The time now is 11:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com