1/2 ton rear end vs. 3/4
 

Apparently I missed something when I got my donor parts. Forgot to tell the man not to cut the panhard bar that attaches from rear end to frame. The 3/4 ton is completely different. Anyone have a suggestion on where to find a good one?? I'd be interested in the whole assembly since I will probably have difficulty getting the rear end mount off cleanly on my new part.

------------------

the length of the bar is different from 1/2 to 3/4 ton, if you have a welder you could lengthen yours with water pipe., etc

unles youre missing frame mount bracket for it ? you have your 1/2 ton bar still, right ?


------------------
-71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it-
-'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies :)
-79 G20 pass van, 350/th350/10bolt,
paint is overrated
Randy- Lincoln, IL

r68c30@hotmail.com
© RSS Enterprises 2000

Fast68-
I am taking the 3/4 out and putting the 1/2 ton in. When the guy cut the rear out of the donor, he cut the 1/2 bar in half. Are the frame mounts the same on both? I have already found that the 3/4 tons is much larger and mounts to the rear-end on a bracket instead of a pin like on the 1/2 ton. What I need is the 1/2 bar and mounts. Have one around??

------------------

i have like 4 or 6 of the 1/2 ton bars, but frame mounts i dunno..

what ya think ?>

68-
What would you want for one of the bars? I'm sure I could figure out the mount. The donor truck probably still has it sitting there. Let me know and thanks for the response.

i could probably maybe find mount, trying to think if i do or not, hmmm, apic may help jiggle my memory, hmm.. i dunno, send me 13 total and i get you a 1/2 ton panhard bar to your door ?

------------------
-71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it-
-'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies :)
-79 G20 pass van, 350/th350/10bolt,
paint is overrated
Randy- Lincoln, IL

r68c30@hotmail.com
© RSS Enterprises 2000

68-
I'll make it an even $15.00 for your trouble. Can't thank you enough. I'll e-mail you when i get down on the board. Sound good?


------------------

alright, I'll be messing around here or somewhere doing something, lol
I'll check mail now and then or in the morning. i owuld think 3/4 ton mounts ot frame same as 1/2 ton do, but i forgot now, been too long since ive had a 3/4 ton coil truck up here, hmmm..

thanks