The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - S10 and C10-gears interchangeable? (https://67-72chevytrucks.com/vboard/showthread.php?t=283262)

S10 and C10-gears interchangeable?

An acquaintance from another, unrelated, board asked me the following question. I didn't know the answer, so I offered to post his question here. I'll send him a link to the thread...

Quote:

I have a 1985 Chevy 1/2 ton 2-wheel drive pickup with a 2.73 10-bolt rear end. I'd like to swap it out to a 3.42 since I really only use the truck these days to haul stuff and it could use some help getting started on an incline with a load.

I also have a 1989 S-10 Blazer 4x4 rear axle under my 1953 Chevy 210 with 3.42 gears in it. I'd like to swap in 2.73s to bring my highway RPMs down and maybe get better mileage.

I know the rear ends themselves will not swap, and I wouldn't want to, but can I swap the gears between the two rear ends? Are they the same, or at least interchangeable?

Thanks for helping him out.

Slonaker

Re: S10 and C10-gears interchangeable?

If the S10 rear is an 8.5" 10 bolt (not the puny 7.5") then I don't see why the gears wouldn't interchange.....as long as they both share the same series carrier.

Re: S10 and C10-gears interchangeable?

That's the thing. Neither he nor I know if they are the same. :)

Slonaker