The 1947 - Present Chevrolet & GMC Truck Message Board Network - Can somebody with a 73-87 repair manual...

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Can somebody with a 73-87 repair manual... (https://67-72chevytrucks.com/vboard/showthread.php?t=283344)

jlaird

03-16-2008 06:18 PM

Can somebody with a 73-87 repair manual...

look up the torque spec for the lower control arm ubolts for me? My original 69 manual is out of date as the spec is for the older 1/2" ubolt that have now been upgraded to 9/16" by GM.

Thanks!

James McClure

03-16-2008 07:57 PM

Re: Can somebody with a 73-87 repair manual...

Jlaird: From the chevy manual for 1984, section 3C page 3C-27, lower control arm shaft "U" bolt
C10 & CP 20 & 30 is 85 foot pounds. Jim

jlaird

03-16-2008 08:36 PM

Re: Can somebody with a 73-87 repair manual...

Thanks James. Wow, that torques spec doubled from the 1/2" ubolt with spec of 40 ft lbs.

All times are GMT -4. The time now is 08:24 AM.