The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   1989 Suburban for parts in Tx* (https://67-72chevytrucks.com/vboard/showthread.php?t=286238)

f.monroe 04-04-2008 08:06 AM

1989 Suburban for parts in Tx*
 
I have a 1989 Suburban 4 wheel drive . It is complete except the door panels on the front doors . I was going to part it but have been cleaning and just do not have the time to dismantle it . $700 for the whole thing . I am listing it in the parts section since it is just for parts . I didnt bother getting the title since I originally intended to use the motor and TBI in an older truck but could check into it if absolutely necessary . It is a 5.7L 350 TBI motor ,serpentine setup , auto tranny , Blue bucket seat interior , rallys , later model style grille front clip ,good front windshield , etc. I am not parting it out at this time . If there is no interest in a week or so , then maybe . I will add pics tomorrow or Friday . Frank

special-K 04-13-2008 05:31 PM

Re: 1989 Suburban for parts in Tx*
 
What is wrong with it?How`s the body?How does the motor run?How many miles on it?Got pics?

f.monroe 04-22-2008 01:53 AM

Re: 1989 Suburban for parts in Tx*
 
No title , It runs if you pour fuel in the tbi . The tank pump isnt working ., Has rust under the body in some of the supports . The doors , fenders , front clip , etc is good . Frank

jdurant 04-27-2008 06:01 PM

Re: 1989 Suburban for parts in Tx*
 
Are you ready to part it out yet? Is it a chevy or GMC? I might be interested in the front clip.

f.monroe 04-28-2008 01:53 AM

Re: 1989 Suburban for parts in Tx*
 
2 Attachment(s)
I am sorry for the delay in pictures on this thing . The front clip is good . The pass fender has some spots where the paint is lifting and there is surface rust under it . it isnt rusted through . The hood and driver fender is straight . One small dengt/ding in pass fender . $300 for the front clip and all headlight wiring will be included from the firewall plug forward . Sorry about the dirty pics in the tall grass . I really need to get rid of this thing and mow around the parts department (barn). Frank

old Rusty C10 04-28-2008 05:20 AM

Re: 1989 Suburban for parts in Tx*
 
does it have full inserts in the door panels or just the half ones like some burbs i need just the chrome colored inserts in the door panels and the pull straps if grey i can send you pics if you want of what i need

f.monroe 04-28-2008 05:46 AM

Re: 1989 Suburban for parts in Tx*
 
Front door panels , dash bezel and dash insert are already gone . Frank

drillingmachine 05-06-2008 02:29 AM

Re: 1989 Suburban for parts in Tx*
 
does it have barn doors or a tailgate? if it has a tailgate, i'd like to buy the window motor if it works.

f.monroe 05-07-2008 12:24 AM

Re: 1989 Suburban for parts in Tx*
 
Its a gate but the last I had a battery in it , the rear window didnt go down if I remember correctly . Frank

chev74 05-07-2008 01:55 AM

Re: 1989 Suburban for parts in Tx*
 
got any pics of the buckets?

MrBeast 05-14-2008 03:03 AM

Re: 1989 Suburban for parts in Tx*
 
Frank, what kind of condition is the engine in? A friend of mine has my old 89 blazer, and the engine is starting to knock, if it runs I might be interested in picking up the whole truck for them.

f.monroe 05-14-2008 05:30 AM

Re: 1989 Suburban for parts in Tx*
 
The tank pump doesnt supply fuel so the only way I have to run it is by pouring a little gas in the throttle body and starting it . Doesnt run long since I do not want to pour gas in a running engine but when it starts , it is quiet and there are no knocks . I have someone locally that looked at it Friday and I told him I would hold it a week or so . I will let you know if he backs out .
Frank

MrBeast 05-14-2008 06:52 AM

Re: 1989 Suburban for parts in Tx*
 
Quote:

Originally Posted by f.monroe (Post 2720960)
The tank pump doesnt supply fuel so the only way I have to run it is by pouring a little gas in the throttle body and starting it . Doesnt run long since I do not want to pour gas in a running engine but when it starts , it is quiet and there are no knocks . I have someone locally that looked at it Friday and I told him I would hold it a week or so . I will let you know if he backs out .
Frank

I appreciate it, I will let my friend know and if it falls through we could very well come get it. I need to get something done for him because he is badly disabled and cant do it himself, it would be a good thing.


All times are GMT -4. The time now is 05:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com