The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   SWB Fleet bed, SWB frames, tailgate etc. (https://67-72chevytrucks.com/vboard/showthread.php?t=287147)

sameyrasmea72 04-11-2008 02:12 AM

SWB Fleet bed, SWB frames, tailgate etc.
 
5 Attachment(s)
1st of all don’t laugh at my shop, it is a disaster.
Next, 72 BlckButy is 1st in line and RatPwrd is 2nd in line

The bed is a 68-72 bed and is in over all good shape. From what I can tell the paint is all original and bed is rust free (some surface rust) so there is nothing hiding. As you can see the drivers side has been replaced.
I will try to list/show the problem areas and will try to answer any questions

The drivers side ,like a lot of bed has some damage to the taillight area, a dent towards the front of the bed, and has had a tarp on it at some point so it has about 10 tiny holes where the buttons were.

The floor is nice with a few dents but is not “barrel rolled “ or wavy like a lot of them. The front drivers side corner has some minor damage that probably occurred when the original bed side was hit.

The passenger side has a couple small dents near the taillights, a bent area on the front lower section and 4 or 5 decent (hail ?)dents on the sides. $975

The frames are both 69 frames and are basically bare frames with coil rear ends. I don’t have many good pics of the frames but will show the ones I have. One frame is damage free I think. $275. And the other one has the front support bent like some one used it to tow the truck or something. I can supply a replacement support for that one. $250.

The tail gate is rust free and is not bowed but does about 5 dents on the outside, but is still a better start than a repro. $225

I will not ship but might deliver/meet for a fee if close. Thanks………. Jason

RESPOND HERE PLEASE.

sameyrasmea72 04-11-2008 02:14 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
5 Attachment(s)
# 2 pics

sameyrasmea72 04-11-2008 02:16 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
5 Attachment(s)
#3 pics

sameyrasmea72 04-11-2008 02:19 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
5 Attachment(s)
# 4 pics

sameyrasmea72 04-11-2008 02:22 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
5 Attachment(s)
Last pics. The 2nd frame no longer has the front end on it.

1972Ryan 04-11-2008 02:29 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
Nice tailgate stash!

62panel 04-11-2008 04:45 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
put me in line on the tailgate

tommypic 04-11-2008 04:49 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
well its ashame that you are like 1800 miles from me I could use 1 of those swb trailing arm frames

Restless914 04-11-2008 06:26 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
My thoughts exactly!!

72BlckButy 04-11-2008 03:11 PM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
Jason... I'm going to have to back out at the moment. RatPwrd you're next!

Thanks for giving me the chance at buying this rust free bed. Good luck with the sale.

RatPwrd72 04-11-2008 04:17 PM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
I'm gonna have to pass for now......:whine:

I've got a local lead on a short step, but it's not as nice as your bed. Thanks for puttin me in line, though.

sameyrasmea72 04-12-2008 09:19 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
ttt

sameyrasmea72 04-16-2008 06:06 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
Wow! no interest in a short box. TTT

David Johnson 04-16-2008 06:28 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
I'd love to have it, but I can't afford to make that drive again!

tommypic 04-16-2008 11:53 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
Quote:

Originally Posted by David Johnson (Post 2679011)
I'd love to have it, but I can't afford to make that drive

:agree: all the good parts are out there . not alot here in the south , well they are but loaded with rust :lol:

sameyrasmea72 04-27-2008 10:15 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
ttt

806em55 05-06-2008 07:14 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
Jason, did you ever get rid of the bed. Call me and let me know what you found, Thanks Eric.

sameyrasmea72 05-12-2008 05:32 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
Eric, Sorry I forgot to respond to your reply. I still have the bed.
What did you mean by ".... what you found"

Jason

806em55 05-12-2008 07:53 AM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
i had talked to paul and he said maybe yall could locate me a short wide that would be a reasionable trade for the suburban and all the parts i have gathered with it. I finilly got all the airride for my truck and when it lays out it wont tuck the 22s up under the rear fenders. Im also moving in Aug. and dont have any where to go with the burb. thats why im hopeing to do some tradeing. You are welcome to call me at any time 806-241-2875. Thanks Eric Martin!!!!!!!

sameyrasmea72 07-11-2008 08:35 PM

Re: SWB Fleet bed, SWB frames, tailgate etc.
 
ttt Bed $800


All times are GMT -4. The time now is 12:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com