The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   uncut dash, header panel, longbox sides (https://67-72chevytrucks.com/vboard/showthread.php?t=290862)

p-low 05-07-2008 11:15 PM

uncut dash, header panel, longbox sides
 
dash is near perfect.....75
longbox sides only need wheel arch patches and i have them....150
long box cross rails...any of them you need 50 bucks takes what you need
beat up chevy lettered tailgate....75 bucks
69 hood ....50
couple of rusty doors, 20 bucks a piece
front 3/4 ton crosmember and suspension ....100
also other items pm me with your needs....68 and 69 trucks

oldsmobilekindofguy 05-08-2008 05:05 AM

Re: uncut dash, header panel, longbox sides
 
do you have pics pf the dash

p-low 05-08-2008 07:02 AM

Re: uncut dash, header panel, longbox sides
 
3 Attachment(s)
here ya go

p-low 05-08-2008 07:03 AM

Re: uncut dash, header panel, longbox sides
 
i cut it off allong the top of the fire wall so that the original spotweld could be drilled and rewelded, can be cut throught the dashpad holes and rewelded...or just the section with the radio but i cut it to allow alll options...thanks let me know

Greg63 06-07-2008 09:53 AM

Re: uncut dash, header panel, longbox sides
 
Can you give me a picture of the crossmember? (I am not needing suspension)
Is the 1/2 ton crossmember different from the 3/4 ton crossmember?


All times are GMT -4. The time now is 12:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com