The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Height / Width info needed (https://67-72chevytrucks.com/vboard/showthread.php?t=291617)

Super73

05-13-2008 11:19 PM

Height / Width info needed

Can anyone tell me the factory height and width of the 60-66 trucks? C10 based. I have been searching and can't find anything.. Thanks in advance.

jonzcustomshop

05-14-2008 12:04 AM

Re: Height / Width info needed

you might find some info on here:
http://www.6066gmcguy.org/

Super73

05-14-2008 12:58 AM

Re: Height / Width info needed

That is one place I looked and could not find anything :(

LILRED66

05-14-2008 06:14 AM

Re: Height / Width info needed

Quote:

Originally Posted by Super73 (Post 2720422)

Can anyone tell me the factory height and width of the 60-66 trucks? C10 based. I have been searching and can't find anything.. Thanks in advance.

Lwb or swb? Fleetside or stepside?

Super73

05-14-2008 06:32 AM

Re: Height / Width info needed

I would assume height and width would be the same regardless of a LB or SB and SS or FS but either way SB/FS..

LILRED66

05-16-2008 07:41 AM

Re: Height / Width info needed

Quote:

Originally Posted by Super73 (Post 2721110)

I would assume height and width would be the same regardless of a LB or SB and SS or FS but either way SB/FS..

71-1/4" tall
78-3/4" wide

I mistakenly thought you were after weight, as well, but I see now you only asked for height and width. I hope this information is helpful...it is from my 1965 Chevrolet Truck Data Book.

All times are GMT -4. The time now is 06:23 AM.