The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   hoisting motor and tranny ? (https://67-72chevytrucks.com/vboard/showthread.php?t=292910)

blazer2007 05-23-2008 05:31 PM
hoisting motor and tranny ?
 
getting ready to install motor 454 and tranny,do you think the two stock lifting tabs on the intake is good enough or should I find two more for all four corners

454HO 05-23-2008 06:20 PM
Re: hoisting motor and tranny ?
 
I lifted my 454 and 4l80e trans together with four bolts (7/16" ??) run into the accessory holes.

http://home.att.net/~gotdart/truck/DSC01957.JPG

http://home.att.net/~gotdart/truck/DSC01962.JPG

slug 05-23-2008 06:51 PM
Re: hoisting motor and tranny ?
 
I'v Used The Lifting Tabs On The Intake, But, I Didn't Have The Tranny Bolted To The Engine.

babyJay 05-23-2008 09:12 PM
Re: hoisting motor and tranny ?
 
I've used them on a small block/tranny combo, but never a BB...Don't get yourself hurt!

joeymarkgraf 05-23-2008 10:08 PM
Re: hoisting motor and tranny ?
 
Is that a harbor freight hoist?

454HO 05-23-2008 11:53 PM
Re: hoisting motor and tranny ?
 
Quote:
Originally Posted by joeymarkgraf (Post 2734975)
Is that a harbor freight hoist?
Nope, it came from Northern Tool. It's their cheapie model that I bought for the shop away from home. It was on sale and the leveler was a freebie.


All times are GMT -4. The time now is 05:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com