Blackjack headers
 

Has anyone ever seen blackjack headers to fit a 67-72 chevy? I have heard that they were really good, but I have only seen them for cars and a dodge truck.

The ones we had on a mote carlo were junk...just experiance.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!:)
Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

They are a guy that sells them on e-bay sometimes brand new for 59.99 for our trucks

------------------
67 GMC Stepside(UNDER CONSTRUCTION)
67 GMC Custom
67 Chevy C-30



[This message has been edited by Tim Christian (edited March 23, 2002).]

Yes, they do make them, I had a set on a 71, bought them through HI/LO auto parts, when they were in business. I didnt like these, very small primary and the collevtors to me was not long enough, they pointed down in an angle, instead of straight back, I would in vest in a good set of Hookers. Just my 2 cents worth!
Sam

I just put a set of hooker comps on the longhorn. I like the fit,nice heavy headers & flanges,& collectors are straight on the bottom/good ground clearance.....69 longhorn.

i thought blackjacks were the same thing as dynomax?

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

I don't know about Blackjacks being the same as Dynomax but I believe they are the same as Cyclone headers. I think that they were bought out or owned by Mr Gasket. At least I think they were back in the days when I used to sell auto parts.

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

Nope, Mr. gasket doesn't have any exhaust products in it's line. Accell, Mallory, Erson, Hayes, and Lakewood are the Mr. Gasket brands.

my mistake, I thought Mr Gasket had acquired them. It seemed like they were buying up alot of companies back in those days. Sorry for any misleading info I have sent out there.

Pont



------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR