The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Remade VIN tags? (https://67-72chevytrucks.com/vboard/showthread.php?t=297653)

energiesource 06-30-2008 05:34 PM

Remade VIN tags?
 
Is there anyway that you can contact chevy to get your vin tags remade? the only one i find was on the glove box on a sticker thats pretty worn down.

neonlarry 06-30-2008 06:22 PM

Re: Remade VIN tags?
 
I seriously doubt it, how are they going to know it isn't stolen?
You will probably have to have you DMV make up one as long as you can prove its yours (bill of sale, registration, etc.).

LONGHAIR 06-30-2008 06:54 PM

Re: Remade VIN tags?
 
The "sticker" on the glove box door is known as SPID. It stands for Service Parts IDentification...while it does have the VIN on it, it's only to keep those details specific to that truck.
State laws vary on this issue quite a bit. Some will allow a simple "bill of sale" to declair it legally yours and issue you a new VIN and title. Other states would "freak-out" confiscate the vehilce, make you jump through hoops, maybe even try to prosicute you.
Get it legal before you do anything to it....

energiesource 06-30-2008 06:59 PM

Re: Remade VIN tags?
 
so how would i go about doing that then?
cant you get custom VIN numbers for vehicles that are made from the ground up if it passes an inspection?

Shane 06-30-2008 07:01 PM

Re: Remade VIN tags?
 
Quote:

Originally Posted by energiesource (Post 2787604)
so how would i go about doing that then?
cant you get custom VIN numbers for vehicles that are made from the ground up if it passes an inspection?

That would probably be a question i would let my local or state officials answer. Like longhair said, laws vary from place to place.

special-K 06-30-2008 07:10 PM

Re: Remade VIN tags?
 
There are the VIN-Plates original to each vehicle along with a title.Anything else would require a reconstructed title/VIN-plate or new constructed title/VIN-plate.

energiesource 06-30-2008 07:11 PM

Re: Remade VIN tags?
 
then where are the vin plates since all i found was the number in the glove box?

Johns70 06-30-2008 07:24 PM

Re: Remade VIN tags?
 
on the rear drivers door post.

Longhorn Man 06-30-2008 07:31 PM

Re: Remade VIN tags?
 
2 Attachment(s)
Look for a plate looking like one of these in your drivers side door jamb under the latch assembly. The red one would be 67 -69 with 2 plates, the blue one is from a 70 - 72.

energiesource 06-30-2008 08:12 PM

Re: Remade VIN tags?
 
hmm
didnt notice one there lol


All times are GMT -4. The time now is 03:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com