The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 5 1 2345
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Parting out 1967-70 SWB truck (https://67-72chevytrucks.com/vboard/showthread.php?t=299024)

Hart_Rod 07-12-2008 12:10 AM
Parting out 1967-70 SWB truck
 
4 Attachment(s)
** SWB bed floor, end gate, wheel tubs and Big block 402, **


SWB floor, tubs and end gate: (please reply in the thread below)
http://67-72chevytrucks.com/vboard/s...d.php?t=301762

72 402 BBC Longblock - $600
Hollley aluminum valve covers - $100 Shipped
Turbo 350 Tranny $125

Steering column - $50
Factory bench seat - $50

98% rust free 1970 Cab and doors with good title. ** Sold to JHolley!! ***

SWB chassis: ** Sold to JHolley!! ***
http://67-72chevytrucks.com/vboard/s...30#post2835030

Nice uncut interior wiring harness/non A/c - *** SOLD to BESTCHEVYFAN ***
Complete 72 BBC motor mounts - *** SOLD to Boatman ****
BB short water pump, alternator brackets, starter - ** SOLD Inthuwind **
4 Core radiator - ** SOLD FINCH **
Rear bumper brackets - ** Sold - 71Stub **.
67-72 Tailgate - Sold to MSGROSS

Parts are located in Albuquerque, NM, just off of I-40. All the big stuff will have to be picked up. If you see anything else that I didn't list a price for, just ask. I will be making a few trips to Oklahoma City this fall and could work out some transportation.

R/

Hart_Rod 07-12-2008 12:11 AM
Re: Parting out 1967-70 SWB truck
 
5 Attachment(s)
More pics:

Hart_Rod 07-12-2008 12:15 AM
Re: Parting out 1967-70 SWB truck
 
5 Attachment(s)
Cab pics:

killer71 07-12-2008 12:16 AM
Re: Parting out 1967-70 SWB truck
 
how much for the front clip

Hart_Rod 07-12-2008 12:17 AM
Re: Parting out 1967-70 SWB truck
 
5 Attachment(s)
Doors:

Spray-Bomb 07-12-2008 02:17 AM
Re: Parting out 1967-70 SWB truck
 
Wish i had the money to buy it all :cool:

northern 85 07-12-2008 08:03 AM
Re: Parting out 1967-70 SWB truck
 
Im confused, rear bed floor end panel? Is this the whole bed minus wheel tubs and tailgate for 300? Where is the truck located?:gmc2:

Hart_Rod 07-12-2008 08:44 AM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by Spray-Bomb (Post 2802966)
Wish i had the money to buy it all :cool:
I could probably make you a sweet package deal, :).

Hart_Rod 07-12-2008 08:44 AM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by northern 85 (Post 2803054)
Im confused, rear bed floor end panel? Is this the whole bed minus wheel tubs and tailgate for 300? Where is the truck located?:gmc2:
No bedsides or tailgate. Parts are in NM. Sorry for any confusion.

68 short step 07-12-2008 10:23 AM
Re: Parting out 1967-70 SWB truck
 
instrested in the 2 grilles....how much to ship both to 74011??

Hart_Rod 07-12-2008 10:34 AM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by 68 short step (Post 2803127)
instrested in the 2 grilles....how much to ship both to 74011??
Wanna meet me in OKC on the 6th of Sept? :)

killer71 07-12-2008 11:09 AM
Re: Parting out 1967-70 SWB truck
 
rob get ss n i sum more detailed picts of the front clip ya know the fenders, under the battery tray. you know what areas i'm talkin bout lol

Number98 07-12-2008 05:29 PM
Re: Parting out 1967-70 SWB truck
 
Nice lookin burb in the background.....

Hart_Rod 07-13-2008 10:09 PM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by Number98 (Post 2803392)
Nice lookin burb in the background.....
:D

BTTT

bestchevyfan 07-13-2008 11:24 PM
Re: Parting out 1967-70 SWB truck
 
Hi, The Frame You Have Listed Is It The One The Body Is On In The Picture. Thanks,buddy

Hart_Rod 07-13-2008 11:31 PM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by bestchevyfan (Post 2804913)
Hi, The Frame You Have Listed Is It The One The Body Is On In The Picture. Thanks,buddy
That is correct.

finch 07-13-2008 11:36 PM
Re: Parting out 1967-70 SWB truck
 
Rob, are you willing to ship the radiator? confirmed this weekend that a 4 row is what I need.

Hart_Rod 07-13-2008 11:40 PM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by finch (Post 2804949)
Rob, are you willing to ship the radiator? confirmed this weekend that a 4 row is what I need.
I will ship it, but it will be a couple of weeks and will probably cost $30 or $40. LMK

finch 07-13-2008 11:45 PM
Re: Parting out 1967-70 SWB truck
 
I'm in no hurry to get it here, but once you get a final price just PM it to me and I will get the funds sent your way. :)

Hart_Rod 07-14-2008 03:31 PM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by finch (Post 2804965)
I'm in no hurry to get it here, but once you get a final price just PM it to me and I will get the funds sent your way. :)
PM Sent.

mahanian 07-14-2008 04:49 PM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by Hart_Rod (Post 2802850)

2 67/68 grilles rust free but dings, $100 a piece

Bed floor, wheel tubs and rear panel (no tailgate or bedsides) $300, no rust but some dents.

Rear bumper bracket - $40.

4 Core radiator - $75

SWB chassis - 5 Lug (F/R), posi rearend, 4 - 15 X 8 ralley wheels, 2/4 dropped springs, ECE dropped spindles, front end rebuilt, sway bar, auto tranny crossmember, power steering box. It has been sitting a while but everything looks tight. It will need cleaned up, but looks pretty good overall. $1200.

R/
Interested in the items above...

Can I get some pictures of the bed floor, wheel tubs, and rear panel?

Does the chassis have disc brakes in the front? If so, are they ECE as well?
Any idea what gears are in the rearend?
Is the frame C-notched?
Do you know how long ago the front end was rebuilt? (time frame and mileage)
What condition are the tires in?

Thanks

BACKYARD88 07-14-2008 05:04 PM
Re: Parting out 1967-70 SWB truck
 
May be interested in one of the grilles if still available pending some pics of the dings if you'd be willing to ship it.

Hart_Rod 07-14-2008 06:40 PM
Re: Parting out 1967-70 SWB truck
 
5 Attachment(s)
Quote:
Originally Posted by mahanian (Post 2805966)
Interested in the items above...

Can I get some pictures of the bed floor, wheel tubs, and rear panel?

Does the chassis have disc brakes in the front? If so, are they ECE as well?
Any idea what gears are in the rearend?
Is the frame C-notched?
Do you know how long ago the front end was rebuilt? (time frame and mileage)
What condition are the tires in?

Thanks
Grilles may be sold local, I'll have to get back to you on that.
I don't have any good pics of the bed floor, but can get some when I get back to NM (7/28/08)
Here's a few of the tubs, dented but no rust.
Radiator may be sold, your 2nd.
I can check on the ratio when I get back to NM. No C-notch. I was told no milage on the front end and it seems tight, but that's the best I can do. It is a disc brake front end. It has ECE on the spindles. The front end parts look factory, which is what ECE sells as far as I know, but again just going off what I was told. The tires are shot! Just good rollers.
R/

Hart_Rod 07-14-2008 06:45 PM
Re: Parting out 1967-70 SWB truck
 
2 Attachment(s)
Floor and end bed.....

Hart_Rod 07-14-2008 06:48 PM
Re: Parting out 1967-70 SWB truck
 
Quote:
Originally Posted by BACKYARD88 (Post 2805997)
May be interested in one of the grilles if still available pending some pics of the dings if you'd be willing to ship it.
Mike, you're #3, I'll get back with you if something changes. Thanks for inquiring,

Rob


All times are GMT -4. The time now is 11:04 AM.
Page 1 of 5 1 2345
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com