The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Welcome Area (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=50)
-   -   new guy from Oregon (https://67-72chevytrucks.com/vboard/showthread.php?t=299548)

GreyDX 07-16-2008 03:12 PM

new guy from Oregon
 
5 Attachment(s)
Ok here's everything relevant about me.
I bought this truck somewhere in the 80's. Had kids then and not much room to work, so I cleaned it up a little and drove it around town.

In the 90's I moved to Oregon and used it to haul lumber for awhile, but things started breaking and I didn't have time or money to keep it ended up so it sitting down by the barn for 15 years baking the paint off.

A couple of years ago I built a decent garage and finally had room to work. I ride motorcycles and got involved building a chopper. It came out pretty nice, won a first at the local show, but now I need something else to play with. Just hauled the old truck up from the barn and hosed the wasp nests out of it.
I'll attach some pictures if I can figure out how : )

jsbgump 07-16-2008 03:14 PM

Re: new guy from Oregon
 
Welcome to the board from Texas

GreyDX 07-16-2008 03:16 PM

Re: new guy from Oregon
 
1 Attachment(s)
Here's my "previous experience" picture. I got a lot of help building this from a forum just like this one. So I want to thank all of you in advance just for being here : )

YOLO 07-16-2008 05:06 PM

Re: new guy from Oregon
 
looks like you have a quality truck to start with. good luck

Cyclone44 07-16-2008 05:32 PM

Re: new guy from Oregon
 
:welcome2: from Knoxville Tn...Great looking bike...Good luck on your truck build..

DREAMS OF A 67 07-16-2008 05:50 PM

Re: new guy from Oregon
 
:welcome2: FROM KNOXVILLE TN!!!

joe231 07-16-2008 10:58 PM

Re: new guy from Oregon
 
welcome!!
i wanna do opposite of you.....build a bike after the trucks are done :lol:
nice looking bike!!

shaneschevys 07-17-2008 12:40 AM

Re: new guy from Oregon
 
Welcome from FT Worth TX.

70LonghornCST 07-17-2008 01:12 AM

Re: new guy from Oregon
 
Welcome from Hughson California!

mr48chev 07-17-2008 02:17 AM

Re: new guy from Oregon
 
Welcome from the middle of Washington state.
It looks like the truck is still pretty solid and will make a great slicked out truck once again.
I really like the looks of the bike, I've been thinking of one on the same lines for a long time.

72BlckButy 07-17-2008 02:38 PM

Re: new guy from Oregon
 
:welcome2: to the board from Mid-MO!!!

BACKYARD88 07-17-2008 02:46 PM

Re: new guy from Oregon
 
:welcome2: from South Texas:D

68,69 K20 07-19-2008 09:33 AM

Re: new guy from Oregon
 
Welcome from NY!

FRENCHBLUE72 07-19-2008 09:40 AM

Re: new guy from Oregon
 
Welcome to the board from just down the road...

krue 07-19-2008 10:46 PM

Re: new guy from Oregon
 
Welcome to the board from South Mississippi!:D

babyJay 07-20-2008 01:47 PM

Re: new guy from Oregon
 
Welcome, from central Indiana! Looks like a good solid platform to work with. Good luck with your build. Nice bike too!

Hoods69BadBowTie 07-20-2008 01:56 PM

Re: new guy from Oregon
 
Hey welcome to the best board around from MT. Nice bike. Sweet looking truck too looks like a good place to start from.

Old Chevy Mech 07-21-2008 04:12 PM

Re: new guy from Oregon
 
:welcome2: Fron CT!!

Frank

chevguy7 07-21-2008 04:46 PM

Re: new guy from Oregon
 
Welcome from Washington!

Frizzle Fry 07-26-2008 12:34 AM

Re: new guy from Oregon
 
Welcome from Hillsboro Oregon. Looks like you have a 64-66 cab and a 62 grille. If it turns out anything like your bike it's gonna be a bad truck!

GreyDX 07-26-2008 01:51 PM

Re: new guy from Oregon
 
Thanks Frizzle and everyone else too.
So that's a 62 grill. Didn't know, but then I can see where they fixed some front damage once. I'll be happy if it's anywhere near as good as the bike, I'm going to try to put a lot less money into it. You know a new V8 can be half the price of a V twin? Sad isn't it.
Anyway thanks for the support everyone. I've got it taken apart now and will be doing things out of order. I want to get most of the painting done before the rain starts, so I'm striping sanding and blasting the cab now.

dan42 07-26-2008 05:10 PM

Re: new guy from Oregon
 
Sounds like you got a busy rest of the summer. Welcome from your southern neighbor. You'll find there are several guys on this board that like bikes (I do, but haven't had one for a long time) and if you go to general discussion and start a thread about bikes/choppers, a lot of guys will jump in. AND there are a lot of cheap parts in the parts sections- you should be able to stay on a budget with your truck. Keep us in the pictures!

L0WRIDE 08-25-2008 03:21 AM

Re: new guy from Oregon
 
Welcome to the boards


All times are GMT -4. The time now is 10:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com