Parting out a 1972 K5 Blazer 4x4
 

I have decided to part this blazer out. I have no title, it has no engine, trans, or transfer case. The drive shafts are gone, and there is no rear seat. The top looks to be in good shape. The doors are rusty at the bottoms but repairable. The tub itself is rusty but someone with less projects than me could repair it. LOL I am keeping the front leaf spring hangers, shackles, engine crossmember, radiator support and a/c parts. Let me know what you need. I am not sure what gears this thing has either. I guess I could open the glove box and check the tag, huh? LOL I do have a TH350 and NP205 tcase I would sell as well. The TH350 needs rebuilt but the tcase is good. Old chevy mech is first in line for the windshield frame. If he decides he doesn't want it then it goes on to the next person. Thanks Ryan.
http://i181.photobucket.com/albums/x...r/100_4054.jpg

http://i181.photobucket.com/albums/x...r/100_4060.jpg

http://i181.photobucket.com/albums/x...r/100_4056.jpg

Re: Parting out a 1972 K5 Blazer 4x4
 

Here are some more pictures. I will try to get some more if needed.
http://i181.photobucket.com/albums/x...r/100_4061.jpg

http://i181.photobucket.com/albums/x...r/100_4058.jpg

http://i181.photobucket.com/albums/x...r/100_4059.jpg

Re: Parting out a 1972 K5 Blazer 4x4
 

Dieselwrencher ,how much will you take for all the lower trims(doors,fenders,rear qaurters)? can i please get a price shipped to fort worth tx. thanx,frank

Re: Parting out a 1972 K5 Blazer 4x4
 

how much for the bumper brackets and driver side arm rest shipped to 75160?thanks

Re: Parting out a 1972 K5 Blazer 4x4
 

It is missing 3 pieces, the lh front fender piece in front of the tire, the lr behind the rear tire, and the piece behind the door on the rh side. How is $50 plus shipping? I will try to get you a quote on the shipping. Thanks Ryan.

Re: Parting out a 1972 K5 Blazer 4x4
 

Let me look at them this afternoon to make sure I can get them off without ruining them. Ryan.

Re: Parting out a 1972 K5 Blazer 4x4
 

does it have the knob for the transfer case?

Re: Parting out a 1972 K5 Blazer 4x4
 

I will check for that as well.

Re: Parting out a 1972 K5 Blazer 4x4
 

Do you want to sell the whole thing, i know a guy looking for one? Thanks Randy

Re: Parting out a 1972 K5 Blazer 4x4
 

I'll get in line for the windshield frame if it's nice, but we need some prices.

Re: Parting out a 1972 K5 Blazer 4x4
 

Isthe engine harness there and complete, also harness for lights

Re: Parting out a 1972 K5 Blazer 4x4
 

i want to get in line for the hardware from the lift door. talking about the latches and the innards and the catches if you got them. thanks

Re: Parting out a 1972 K5 Blazer 4x4
 

Can you put me in line for the front bumper brackets?

Re: Parting out a 1972 K5 Blazer 4x4
 

There aren't any on this, they were gone when I got it. But I do have an extra set off of a 71 C10 if they will work.

Re: Parting out a 1972 K5 Blazer 4x4
 

Price on power steering box brace on the frame, headlight switch knob and wiper knob to 27703?

Re: Parting out a 1972 K5 Blazer 4x4
 

Put me in line for the front locking hubs, steering wheel, cig lighter, and A/C side vent housing and top vents, and glovebox door pending price and shipping to TX 78015. Thanks

Re: Parting out a 1972 K5 Blazer 4x4
 

How much for the buckets and console shipped to 30094?

Re: Parting out a 1972 K5 Blazer 4x4
 

$300 plus shipping. I will have to get a quote and get back to you. I will also get better pictures for you.

Re: Parting out a 1972 K5 Blazer 4x4
 

I am keeping the a/c stuff, the steering box is really worn out basically just a core unit. I haven't even opened the glove box yet so I will let you know on it. I will try to get on here tomorrow and post up.

Re: Parting out a 1972 K5 Blazer 4x4
 

As for the stuff I haven't responded to, I will verify the stuff is there, and or see if it is any good tomorrow. I didn't get a chance to get down there tonight. Thanks Ryan.

Re: Parting out a 1972 K5 Blazer 4x4
 

Just the steering wheel, not the box. The other stuff let me know, thanks. Hubs?

Re: Parting out a 1972 K5 Blazer 4x4
 

I need the outer front bumper brackets (I see them in the pictures) for a '71-'72 4x4 ('67-'70 4x4 and 4x2 is different, '71-'72 4x2 is also different).

Re: Parting out a 1972 K5 Blazer 4x4
 

door panels price and pictures please shipping to 24477 thanks

Re: Parting out a 1972 K5 Blazer 4x4
 

I would like the fuse panel/wiring harness from under the dash if it's not spliced up too bad, and the rear hatch if it's solid and not cracked up.

Re: Parting out a 1972 K5 Blazer 4x4
 

How about the deflectors that mount on the rear bumper brackets?