![]() |
Anyone from Ontario Can.
1 Attachment(s)
New here and just thougth i would say hi. Here is a picture of the truck I bought 2 weeks ago and I am told it came up from Oklahoma. I'm taking the 20" rims off and going to lower a little.
|
Re: Anyone from Ontario Can.
nice... It does have that Donk look right now.
|
Re: Anyone from Ontario Can.
Nice Truck! Welcome from Ohio. I'd get rid of those rims too. Good Luck
|
Re: Anyone from Ontario Can.
Quote:
|
Re: Anyone from Ontario Can.
real big in the south east, a lowrider style car with 20 inch plus wheels.
most look like 4wd's with low profile tires. |
Re: Anyone from Ontario Can.
who let that out of my state!!! :lol:
nice truck... sent you a pm about the wheels |
Re: Anyone from Ontario Can.
Going to be a sweet lookin' ride Jay
WELCOME from Alberta |
Some progress
1 Attachment(s)
Got the 20's off and put the lowering kit in. Now I need to find a set of smooth baby moons that fit that rim. Any Ideas ?
|
Re: Anyone from Ontario Can.
nice truck:chevy:.
|
Re: Anyone from Ontario Can.
Really nice looking truck. I live in Brantford. Maybe this weekend you could drive it to "Johnny B Good" just outside of Brantford. They have a weeky car show
I'll post a picture of my truck. Welcome from Brantford Paul S |
Re: Anyone from Ontario Can.
Welcome from Newmarket, Ontario.
|
Re: Anyone from Ontario Can.
Looking alot better already Jay
T |
Re: Anyone from Ontario Can.
Off with the 20's and down to the ground, good plan! Very nice peecup there...
|
Re: Some progress
1 Attachment(s)
Quote:
Looks better already. I have a set of smoothies. Mine are Pacer brand... http://www.pacerwheels.com/ Summit also carries smoothie wheels... http://store.summitracing.com/partde...5&autoview=sku And here's a pic of mine... 15x7's all around with 215/65r15 tires...:ito::chevy: |
Re: Some progress
Good looking truck jchav62
|
Re: Anyone from Ontario Can.
Not ready to go to the cruise this weekend but I am trying to have it ready for the big one that there having at the Paris Fair on Friday night (29th).
Quote:
|
Re: Anyone from Ontario Can.
very nice
|
Re: Anyone from Ontario Can.
Another newbie here from Caledonia. Your truck looks much better with the rally wheels than the 20". Did you find a set of caps for them yet? If they are 8" wide rims, I have a real nice set of trim rings that will work on those wheels. Give me a PM and I will tell you about them.
|
Re: Anyone from Ontario Can.
welcome from hanover, truck looks great! how much lower did the kit drop the truck? I bought a 3" in front and 4" in back but my 65 is in pieces still so won't know what it will look like yet.
|
Re: Anyone from Ontario Can.
My truck uses all 1972 pieces on the original cross member. Would not do it that way if I had to do it again. I think using the later unit would be much easier. I used 2" springs in the front and 3" springs in the back with 235/70R15 tires on 8" wide stock wheels. With the extra inch, yours will sit good. I live in rural country so didn't want it real low.
|
Re: Anyone from Ontario Can.
That is 2" in the front and 3" in the rear using CPP springs. I have 245/60-15 tires on 8" rims
|
Re: Anyone from Ontario Can.
Lookin good....
|
All times are GMT -4. The time now is 12:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com