parting 1972 cheyenne super 3/4 4x4
 

I wrecked my 72 3/4 4x4 bent frame It was a 2 owner truck tilt tact a/c dealer installed winch auto 205 no spin 410 rear big hub front extream hooks only the engine is sold 550 on tranny transfer 550 on hooks 350 on winch I have another frame from a 72 I have a clean 72 air cab factory black I was going to restore but money is tight i'm in vancouver washington

Re: parting 1972 cheyenne super 3/4 4x4
 

PM sent

Re: parting 1972 cheyenne super 3/4 4x4
 

Noticed you don't have PM so an email is on the way

Jason

Re: parting 1972 cheyenne super 3/4 4x4
 

Is the tilt column coulumn or floor shift? How much for the tilt column? how much for the tach dash?

Re: parting 1972 cheyenne super 3/4 4x4
 

are you parting everything ?

Re: parting 1972 cheyenne super 3/4 4x4
 

Interested in glovebox door and vehicle identification plate if you are willing to sell. Thanks.
Joshua

Re: parting 1972 cheyenne super 3/4 4x4
 

the tilt is a colum shift

Re: parting 1972 cheyenne super 3/4 4x4
 

250.00 on the tilt the tact is also 250.00

Re: parting 1972 cheyenne super 3/4 4x4
 

front ebrake cable?

Locking hubs (if OE blue center)?

Re: parting 1972 cheyenne super 3/4 4x4
 

pics of lockouts, door mirrors. does it have a toolbox in the bed side ?? if so I am interested in that also.

Re: parting 1972 cheyenne super 3/4 4x4
 

core support , tailgate, mirrors , door handles outer, headliner and trim ring,?

Re: parting 1972 cheyenne super 3/4 4x4
 

No it doesn't have atool door I'm trying to add pic's it does have blue hubs that work it has e-brake cable 25.00 on cable

Re: parting 1972 cheyenne super 3/4 4x4
 

Do you happen to have the hard tubes for the condenser to compressor line and evaporator line to drier? Should be the ones that come out just under the battery tray.

Re: parting 1972 cheyenne super 3/4 4x4
 

core support junk tailgate junk mirror are three prong handles are good headlinertrim

Re: parting 1972 cheyenne super 3/4 4x4
 

I have the line in repo mine are not good I've had them for a yror so still in pacage 30.00 shipprd

Re: parting 1972 cheyenne super 3/4 4x4
 

Passenger side front bumper bracket?

Re: parting 1972 cheyenne super 3/4 4x4
 

I'd be interested in the ebrake cable at that price if it can be removed with the finger prongs that hold it to the frame bracket intact. New is $75 so working used @$25 is fair. Will take OE lockouts pending pic and price.

Re: parting 1972 cheyenne super 3/4 4x4
 

how about door panels?

Re: parting 1972 cheyenne super 3/4 4x4
 

door panel are white I'll send pic's

Re: parting 1972 cheyenne super 3/4 4x4
 

I would like to be first inline if you have the factory hupcaps. Thanks!!

Re: parting 1972 cheyenne super 3/4 4x4
 

I have them there rough I'll send pic's

Re: parting 1972 cheyenne super 3/4 4x4
 

It has 9.75 slots on it right know there in good shape 33x12,50 16.50

Re: parting 1972 cheyenne super 3/4 4x4
 

i'd like 450.00 on the slots

Re: parting 1972 cheyenne super 3/4 4x4
 

Put me inline on the colum pm let me know any pics

Re: parting 1972 cheyenne super 3/4 4x4
 

I would also be interested in the tilt, if it makes it to me. Just column or wheel included? Picks if it makes it this far.