Custom gauge cluster with digital gauges
 

Covans gauge panel with Nordskog Intellitronics digital gauges. It was wired up by the former owner of my truck. It has LEDs for brights and turn signals. Looks like he did a good job wiring everything together. It dosen't look like it was ever used and all components are in new condition. There are also 2 extra gauges that will go with it. The gauges are as follows:
Speedo
tach
oil temp with memory
trans temp with memory
oil pressure
water temp
fuel level
voltmeter

$500

Re: Custom gauge cluster with digital gauges
 

Re: Custom gauge cluster with digital gauges
 

What are the extra gauges and how about the sending units?

Re: Custom gauge cluster with digital gauges
 

The 8 gauges are listed above.
6 in the bezel and 2 extra. The extras are the oil and trans temp gauges.
Only 2 of the gauges need senders and both are included.(oil pressure and water temp) The speedo uses an adapter looking thing and it's included as well.

Re: Custom gauge cluster with digital gauges
 

...

Re: Custom gauge cluster with digital gauges
 

Numeric. If they took senders they should be there. I can get pics of the others if wanted. I was reading some of the instructions about holding a button down to calibrate but don't remember which gauges it was. they are nice gauges just not my style. I can use the cash to buy other stuff I need.

Re: Custom gauge cluster with digital gauges
 

...

Re: Custom gauge cluster with digital gauges
 

if you decide to split it up, I am interested in the Covan's bezel.

Re: Custom gauge cluster with digital gauges
 

Ttt

Re: Custom gauge cluster with digital gauges
 

Speedo and tach are sweep style. Others are numeric. TTT last time.

Re: Custom gauge cluster with digital gauges
 

i am interested although i am not sure if i like the style as well. but i do have a question... if you were to split up & say "shane" got the bezel how much would you sell the gauges & all related items for??? you can pm me if wanted.

thanks for the time & good luck!

rodstored-72

Re: Custom gauge cluster with digital gauges
 

I would rather keep it all together. It's all wired together and has LED's that are epoxied to the backside to hold them in place. Also has 2 of the sending units epoxied to the lower right side.

Re: Custom gauge cluster with digital gauges
 

thanks!!
i understand... they do look good. if times were a little better i would probably go for it.... good luck!!!

ttt for ya!

Re: Custom gauge cluster with digital gauges
 

Still available. $400

Re: Custom gauge cluster with digital gauges
 

Still available? I think I bid on these on ebay a while ago. but I missed out on the ending. what kind of senders do I have to buy to make it work with my 67

Re: Custom gauge cluster with digital gauges
 

The sending units are included.

Re: Custom gauge cluster with digital gauges
 

Do you have any pictures of them "lit up"?

Re: Custom gauge cluster with digital gauges
 

No. I've never tried to install them.

Re: Custom gauge cluster with digital gauges
 

ratrod67,
i am still interested. i assume that everything needed to work (from product standpoint) is included? also how would these work in relation to the factory gauge harness? i have a new harness & am guessing that the connection(s) (?) would be a matter of "splicing" wires together???

thanks!!

Re: Custom gauge cluster with digital gauges
 

Interested in guage cluster please call me ASAP 678-608-8090 if its still avail

Re: Custom gauge cluster with digital gauges
 

Is the cluster still available?

Re: Custom gauge cluster with digital gauges
 

Yes. Still available.

Re: Custom gauge cluster with digital gauges
 

I am still interested