The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   1964 wiring diagrams (https://67-72chevytrucks.com/vboard/showthread.php?t=308536)

mnky30 09-29-2008 01:12 AM

1964 wiring diagrams
 
dose any have a pic of the wiring for a c10 starting to do my wiring on my truck and need help thanks

kizer 09-29-2008 10:24 AM

Re: 1964 wiring diagrams
 
I wouldn't say this is the drawing, but this one seems ok for my 65. I picked up on over at clasiccarwiring.com that I do now use. Note it has numbers which are the gauge of wiring.

http://i398.photobucket.com/albums/p...ness-COLOR.jpg

joe231 09-29-2008 11:00 AM

Re: 1964 wiring diagrams
 
i have one at home
ill post it tonight

mateo1279 09-29-2008 01:22 PM

Re: 1964 wiring diagrams
 
http://67-72chevytrucks.com/vboard/s...d.php?t=193429

This might be what you are looking for. I saved it to my hard drive and can zoom in with the viewer I have.

-Matt

mnky30 09-29-2008 05:02 PM

Re: 1964 wiring diagrams
 
thanks guys for all the help that is going to help me out a great deal no more guessing

kizer 09-29-2008 06:41 PM

Re: 1964 wiring diagrams
 
Guessing. I call it trouble shooting. Honey turn that switch and I just tap things until they work and try to remember which did what. ;)

Hahahaha. Seriously a good wiring diagram can save you hours and hours of guess work. I had an old VW once that would not start unless the head light switch was on. I later figured out it was because well the power routed through the headlight switch and back down. Free ignition kill switch and I didn't even know it. Of course the gas gauge never worked, but eventually I figured that one out as well.

mnky30 09-29-2008 06:47 PM

Re: 1964 wiring diagrams
 
that kind of sounds like the bmw i had a couple of years ago. heater had to be on to turn the radio on and roll down the windows took a while to figure that one out. then sold it for more then i bought it for. thanks for the wire diagram:lol:


All times are GMT -4. The time now is 09:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com