Buddy Bucket Parts - Buddy seats, tracks, clamps
 

I have a couple extra Buddy seats I'd like to get out of the way.

1. 1967 CST Buddy seat. The bottom seat is missing (basically a piece of 1/2" plywood and a couple inch thick piece of foam). The top foam is ok but the wood should be replaced. The PO cut a little notch in the front to add a lock:confused:. Surface rust only. $45 plus $25 shipping to the ConUS.


2. Dodge Buddy seat. The metal part is IDENTICAL to the CST box except for the 4 small holes in the front of the box that will be covered when finished. The top part of the seat looks more square than the CST seat, but it may just be the cover. I used a Dodge seat in my truck. It had a different cover and looks great with new covers (Pics below) $65 plus $25 shipping to the ConUS. SOLD


3. Driver side seat tracks. Off a Dodge seat, but very close to the CST track. The studs are a little longer and the adjuster arm is mounted farther out (Pics of both below). One of the rollers needs to be persuaded back over the nipple. Missing one spring. $40 Shipped to ConUS. SOLD


4. 3 Buddy seat hold down clamps. As a cheap alternative use 3/4" One hole electrical conduit strap. $10 each shipped or all three for $25 Shipped to ConUS.SOLD

If shipping is less than $25 on the Buddy seats I'll refund the difference, if it's more I'll eat it. For shipping outside the ConUS. PM your address for a quote but, if you want to be inline please reply in the thread.

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

Here is a shot of my seats using a Dodge buddy seat and a shot of Dodge seat tracks reversed on the passenger seat so I can slide it forward for access.

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

ttt any offers?

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

I would be interested in a pair of the seat tracks. Thanks

John

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

I only have the one pair. The pic. is just to show the slight differences. I'll take Paypal or Postal M.O.

Thanks,
Jay

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

i'll take the three center seat hold downs. -jake

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

dang, John beat me to the seat tracks...

Did you use a chevy frame on your dodge seats? I have a set of dodge seats and might just get some end pieces bent to match the chevy kind...

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

PM Sent.

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

Just the center buddy seat is out of a dodge. I ran across two different styles of dodge buddy bucket frames, but I think both could be easily modified as you stated.

Jay

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

Hi Jay,
Thanks for the chance to purchase the tracks. If you can send me your paypal, I'll get payment right out to you.

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

PM Sent.

Thanks,
Jay

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

Jay
You should find paypal in your mail. Thanks for the nice tracks!


John

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

ttt- BIGJAKE97 do you still want the clamps?

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

yes. paypal sent. sorry if i took a little long. thanks, jake

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

The tracks and clamps both shipped out this morning. Thank you both!

Jay

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

ttt- I may have a few more clamps if anyone is interested.

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

ttt

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

i'm interested in the extra clamps. -jake

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

I got the tracks. They are great. Thanks! If you get a chance to send along the track wire . I would appreciate it. Thanks again for the great parts!

John

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

What are the seats out of? ... they look way nice,more info please ... just looking for ideas on my project. Thanks.

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

Sorry guys I missed a few post! BIGJAKE97-Sending you a PM

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

I was waiting for you to respond to my PM and missed this post. I'll get that sent out to you. It blended into my bench and I didn't notice it until 2 days later. :lol:

Jay

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

The seats are 1967/1968 Buddy Buckets. I had my upholstery guy add some padding to the sides on the bottom cushion and the back cushion to give them more of a bucket look and feel. Glad you like them I think they turned out great.

Jay

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

paypal sent for the extra hold downs. thanks, jake

Re: Buddy Bucket Parts - Buddy seats, tracks, clamps
 

Still looking for my missing part for the seat tracks, ????? I sure would like to get this sale finished up.